We make ourselves a short-stroke throttle grip.

muhoboy · 10-21-2021, 09:01 AM

Taking a short stroke at the throttle grip is not difficult at all. Remove the throttle handle, glue a strip of plastic into the groove of the gas cable. We select the thickness of the strip experimentally. The thicker the strip, the shorter the throttle travel.
Good luck to all!

muhoboy · 10-21-2021, 09:06 AM

With a strip thickness of 2mm. throttle pile travel is reduced by approximately 20%

**JerryHawk250** · 10-21-2021, 09:10 AM

I've done this same mod on all my bikes. Cheap and easy.

DualSportDude · 10-23-2021, 11:41 AM

Thanks for sharing your mods, I hadn’t seen this one but really don’t like having to choke up or bend my wrist to reach WOT. Did this mod last night, just checked it, still too long on cable travel, needs another layer.

wheelbender6 · 10-23-2021, 08:11 PM

Very clever. Boy does a shorter throttle pull make riding easier.

10-21-2021, 09:10 AM	#3
JerryHawk250 Moderator Join Date: Oct 2016 Location: Houma, La. Posts: 11,713	I've done this same mod on all my bikes. Cheap and easy. __________________ 2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel
	0

10-23-2021, 08:11 PM	#5
wheelbender6 Join Date: May 2015 Location: Houston area Posts: 1,902	Very clever. Boy does a shorter throttle pull make riding easier. __________________ "Its not WHAT you ride; its THAT you ride"
	0

10-23-2021, 11:41 AM	#4
DualSportDude Join Date: Jul 2021 Location: Georgia, USA Posts: 91	Thanks for sharing your mods, I hadn’t seen this one but really don’t like having to choke up or bend my wrist to reach WOT. Did this mod last night, just checked it, still too long on cable travel, needs another layer.
	0