04-03-2020, 06:16 PM
|
#1 |
|
Join Date: Mar 2020
Posts: 9
|
Mikuni VM22 Recommended Jet & Pilot Size. Also Black Emissions Filter Under Seat Help
Hello,
I am installing a genuine Mikuni VM22. What is the recommended jet and pilot size to start out on? I do live in Reno NV so our elevation is about 3200ft. I am new to carbs so I have very little knowledge. I have been looking the forum but was unable to find anything. Thank you Last edited by Mack87; 04-03-2020 at 07:55 PM. |
|
|
04-03-2020, 07:51 PM
|
#3 |
|
Join Date: Mar 2020
Posts: 9
|
So I followed the line and this part was not even bolted to the bike. What would happen if I take this part off of the bike? I noticed the gas tank was hooked up to it. Can I remove it and leave the tube connected to the gas tank? There is no smog for motorcycle in my State.
|
|
|
|
04-07-2020, 02:20 PM
|
#4 |
Join Date: Feb 2017
Location: Holiday, Florida
Posts: 672
|
Greetings!
Welcome to the forum!
Just a few questions to get started with: What bike do you have? Have you modified anything yet? Do you plan on modding it? What kind of riding are you looking to do with it? Commuting? Stunting? That’s enough questions for now. Do you have any pictures of your entire bike? Enjoy the Ride!
__________________
Dan-O -2018 Tao Tao HellCat - DOA -2016 Hawk 250 - Kitty Hawk - eBay exhaust, Mikuni carb(120 main/30 Pilot), airbox mod with K&N filter, digital cluster, total LEDs, 17/45 sprockets, RK chain, Shinko 244 tires, trunk, aftermarket levers, burrito tube, skid plate, Sargent Cycle Seat... -2003 HD Sportster 100th Anniversary -1999 Buell X-1 Lightning - Race kit, Buell Seat |
|
|
|
04-08-2020, 03:19 PM
|
#5 |
|
Join Date: Mar 2020
Posts: 9
|
I bought the bike just to ride around with my wife. She is 4'11 @ 100lbs. She really wanted a sports bike so I bought her a new Z125 Pro. It is the only bike she can reach and handle weight wise. we are hoping she will graduate to a bigger bike in the future. It looks weird when we ride together when I am on my Honda Stateline 1300. I also thought it wold be a great way to learn to work on motorcycle.
So far I removed everything that was connected to the carb and manifold. I installed a gen VM22-133 22mm Mikuni VM Carburetor and new manifold. Put a petcock before the fuel filter. Added new fuel lines. Front sprocket and chain. I took out the air box and carbon filter. I plugged the bottom hose from the bore. I had to cut some of the plastic to get the air filter to fit. I did not want to carb to be leaning to the side when the bike was in the upright position. I dont know anything about carbs but what I researched the past few days. My idle is really good and within the allotted amount of turns for the fuel / air screw. But I believe the 100 jet is to big since my spark plug is turning black after riding 30miles. I did not want to touch it since I am putting an exhausts on the bike. I need to take it to the shop to have it bent. I am hoping the new exhausts brings in enough air to lean it out. Since my altitude is 3000 plus there is a lot less air here. I am just happy I did not add the 110 jet like most people recommend. Please let me know if I am missing something. I have never had to do anything on a motorcycle besides change the oil, filter and spark plugs. I know how to work on cars, trucks ect.. though |
|
|
|
09-27-2021, 10:39 AM
|
#6 |
|
Join Date: Jun 2007
Location: Reno, NV
Posts: 89
|
Where did you settle on jets? I'm also in Reno, just picked up an Apollo 140cc dirt bike for my wife and to teach riding to a local foster kid we mentor..
You also mentioned being new to motorcycle/mechanics... if you need any local expertise I've been wrenching on bikes for 35 years or so.. not professionally but I've rebuilt several from the ground up and do all of my own wrenching. |
|
|
|
|
|
 |
| Tags |
| jet, mikuni, pilot jet |
|
|
Linear Mode
