01-11-2017, 02:51 PM | #16 |
Join Date: Dec 2016
Posts: 9
|
I just shot Larry an email, hopefully I'll hear back! The black/red wire is grounding on both of the stators that I have. Is there any way somebody could check on their bike to see if this is correct? l wonder if I am missing some rubber/plastic washers that would prevent the stator from making a connection with the engine...
|
|
02-05-2017, 07:04 PM | #17 |
Join Date: Jan 2017
Posts: 20
|
Any luck? Having similar problems, except I get zero spark.
Stator tested good per the second youtube video. |
|
02-12-2017, 12:10 AM | #18 |
Join Date: Dec 2016
Posts: 9
|
Still no luck here, my stator also tested OK. If I figure something out I'll let ya know!
|
|
04-19-2019, 09:17 AM | #19 |
Join Date: Apr 2019
Posts: 5
|
Thread resurrection! Did the OP ever figure this out? Sounds like he is having a similar problem to mine, but after the lifan swap. I lose spark signal on the Kasea as soon as the coil is hooked up.
I decided to go ahead and do a lifan swap to get rid of all this archaic Kasea stuff that there is no info on. I hope this is a good plan. any insights? |
|
04-25-2021, 02:47 PM | #20 |
Join Date: Apr 2021
Posts: 1
|
Solution
Any solution to this issue?
|
|
|
|
|
|