01-24-2021, 05:01 PM | #1 |
Join Date: Jan 2021
Posts: 3
|
What’s Your preferred oil for Uni pod filters?
Can’t find much on this specific topic and maybe it doesn’t matter if it’s a pod filter or not. I’m not sure about any difference in the glue seams. I’ve read that No Toil (I guess just the red since it has alcohol in it) damages the glue on UNI filters. Is this true of the pod filters though? And what are the thoughts on the no toil green?
I’m trying to decide on an air filter oil for the 2 stage UNI pod filter and not sure about official cleaners vs dawn. I’d love to go the no toil route though. Specifically the Evolution which from what I’ve read on here by the moderator Spudrider(?) can be cleaned easily with oxiclean which I have a ton of already. |
|
01-24-2021, 05:23 PM | #2 |
Join Date: Oct 2020
Location: Central VA
Posts: 1,259
|
I used K&N air filter oil on my Nibbi pod filter, have used it on other pod filters as well with good results
__________________
2024 Zuma Storm 150 DLX 2019 Beta 430 RRS 2018 VStrom 1000 XT Former China Bikes: Tao DBX1, Brozz 250, CSC RX4, Titan DLX, Templar X |
|
01-24-2021, 09:08 PM | #3 |
Join Date: Aug 2009
Posts: 564
|
I use the PJ1 Foam Filter Kit...
|
|
02-03-2021, 07:40 PM | #4 |
Join Date: Jan 2021
Posts: 3
|
Thanks for the input. I wound up going with an angled 2 stage uni foam filter with an outer wears and green No Toil for the oil. I will use oxiclean that I have already to clean it.
|
|
|
|
|
|