![]() |
#2 |
Join Date: Nov 2020
Posts: 21
|
Jeez this is my 3rd time trying to reply, idk why my post keeps cutting.
I have the 250rx offroad version. Just put in a mikuni clone. Suggested stating point is: 25 pilot jet, 115 main jet, needle jet pin at 3rd notch from top, air/fuel screw 1.5 turns out. I did this and the bike started right up. i'm at 1020ft elevation. then turn the screw in half point increments when tunning. See my earlier thread for more info --> http://www.chinariders.net/showthrea...ight=firstbike |
![]() |
|
![]() |
|
|