Need help getting parts for RED CAT

RYU583 · 06-28-2020, 02:12 AM

Hello everyone,

I just purchased a RED CAT dirt bike which I believe is 150cc. The Shift shaft has been sheared off and needs a bit of work.

Anyone know anything about this bike or what bike is compatible as far as parts go?
It looks similar to the RPS Viper, but I am not certain they are identical.

Where would be a good place to get parts for this bike?

Thank you all and be safe

culcune · 06-28-2020, 08:10 PM

I would probably start with the RPS bike. Not too many 150cc dirtbikes for reference other than the RPS as far as vertical engines go. The rest seem to all be pitbikes.

Edit: Baja Motorsports had a Hensim 150 dirtbike (which would also be the same as the RPS) and Baja still has a site, although they don't sell bikes, but do have parts catalogs. Not sure if they are even in business, but it couldn't hurt to call!

http://www.bajamotorsports.com/parts_catalogs

humanbeing · 06-28-2020, 09:55 PM

The 5-speed CG125 seems as stock (19.5cm). The longer 1 is found in trike or 175/200...
Forget the 4-speed in left as u won't find that config in offical imports...
Typical CG125:

RYU583 · 06-30-2020, 11:19 PM

Quote:

Originally Posted by culcune

I would probably start with the RPS bike. Not too many 150cc dirtbikes for reference other than the RPS as far as vertical engines go. The rest seem to all be pitbikes.

Edit: Baja Motorsports had a Hensim 150 dirtbike (which would also be the same as the RPS) and Baja still has a site, although they don't sell bikes, but do have parts catalogs. Not sure if they are even in business, but it couldn't hurt to call!

http://www.bajamotorsports.com/parts_catalogs

Thanks!

I tried contacting a vendor of the RPS Viper and they wrote back telling me that even though the bikes look identical.....the parts are not compatible
not sure how accurate that is

RYU583 · 06-30-2020, 11:23 PM

Quote:

Originally Posted by humanbeing

The 5-speed CG125 seems as stock (19.5cm). The longer 1 is found in trike or 175/200...
Forget the 4-speed in left as u won't find that config in offical imports...
Typical CG125:

Thank you.

so will the CG125 shaft work for my 150?

06-28-2020, 02:12 AM	#1
RYU583 Join Date: Jun 2020 Posts: 4	Need help getting parts for RED CAT Hello everyone, I just purchased a RED CAT dirt bike which I believe is 150cc. The Shift shaft has been sheared off and needs a bit of work. Anyone know anything about this bike or what bike is compatible as far as parts go? It looks similar to the RPS Viper, but I am not certain they are identical. Where would be a good place to get parts for this bike? Thank you all and be safe
	1

06-28-2020, 08:10 PM	#2
culcune Join Date: May 2006 Location: Yuma, Arizona Posts: 9,056	I would probably start with the RPS bike. Not too many 150cc dirtbikes for reference other than the RPS as far as vertical engines go. The rest seem to all be pitbikes. Edit: Baja Motorsports had a Hensim 150 dirtbike (which would also be the same as the RPS) and Baja still has a site, although they don't sell bikes, but do have parts catalogs. Not sure if they are even in business, but it couldn't hurt to call! http://www.bajamotorsports.com/parts_catalogs __________________ "They say that life's a carousel, spinning fast you got to ride it well..." TGB Delivery Scooter 150 TMEC 200 Enduro--carcass is sadly rotting in the backyard
	0

06-28-2020, 09:55 PM	#3
humanbeing Join Date: Mar 2008 Posts: 2,436	The 5-speed CG125 seems as stock (19.5cm). The longer 1 is found in trike or 175/200... Forget the 4-speed in left as u won't find that config in offical imports... Typical CG125: __________________ Last edited by humanbeing; 06-28-2020 at 11:10 PM.
	0