Apache RLX valve clearances

kipper1959 · 06-23-2020, 03:14 PM

Can anyone tell me what the correct valve clearances are for an Apache RLX 250? I have a service manual, it supposedly covers all Apache 250`s but does not mention my actual model. it says 0.05mm inlet & 0.05mm exhaust. Everyone keeps telling me that those clearances are wrong.Help Please !!!

crabjoe · 06-23-2020, 03:56 PM

If it's a GY6, .05mm should be fine. I think those telling you the service manual is wrong are thinking standard measurement, not metric.

kipper1959 · 06-23-2020, 04:03 PM

Not sure if its a GY6, very little on the logbook, its oil cooled if that's any help.
If GY6 is the single cylinder model - no, this is a twin cylinder.

06-23-2020, 03:14 PM	#1
kipper1959 Join Date: Jun 2020 Location: Newport Gwent Posts: 2	Apache RLX valve clearances Can anyone tell me what the correct valve clearances are for an Apache RLX 250? I have a service manual, it supposedly covers all Apache 250`s but does not mention my actual model. it says 0.05mm inlet & 0.05mm exhaust. Everyone keeps telling me that those clearances are wrong.Help Please !!!
	0

06-23-2020, 03:56 PM	#2
crabjoe Join Date: May 2020 Location: Ceciltucky Posts: 188	If it's a GY6, .05mm should be fine. I think those telling you the service manual is wrong are thinking standard measurement, not metric.
	0

06-23-2020, 04:03 PM	#3
kipper1959 Join Date: Jun 2020 Location: Newport Gwent Posts: 2	Not sure if its a GY6, very little on the logbook, its oil cooled if that's any help. If GY6 is the single cylinder model - no, this is a twin cylinder.
	0