Shark 250 - Page 2

Shark250 · 09-21-2018, 12:35 AM

Yeah the wind blew it over and the spring shot off and bent the stand completely

Shark250 · 09-21-2018, 06:12 PM

No it bent really bad sits at like a 30 degree angle now anyone have a spare they could mail me haha I’ll pay shipping! Or an alternative that I could buy

Shark250 · 11-20-2018, 04:32 PM

Quote:

Originally Posted by 2LZ

Broke....like snapped in half?

It’s bent in half and I’ve contacted someone to have a new one built but they want 140 to bent it back and I want to know where to just buy a new one?

culcune · 11-21-2018, 12:22 AM

Surely you can find one similar? $140 seems a little steep. Even though Peace Sports only currently imports the Brozz, the Shark should be similar enough that the kickstand will work. Give them a call for a replacement.

NzBrakelathes · 11-21-2018, 10:35 AM

Quote:

Originally Posted by Shark250

It’s bent in half and I’ve contacted someone to have a new one built but they want 140 to bent it back and I want to know where to just buy a new one?

Bend straight then weld some heavy angle to support it

2LZ · 11-21-2018, 10:48 AM

That has to be your basic Hondoid side stand. Even if you find one without the fancy little rubber thing, so be it.

Kinda like this:
https://www.ebay.com/i/232472054048?chn=ps

Or, like NZ says, just bend it back.

The biggest mistake folks make with these bikes is trying to get way too specific when attempting to find parts. Search things like "Chinese dirt bike kick stand" and topics like that.

There's also CSC. See link.

https://store.cscmotorcycles.com/TT2...RAME-s/359.htm

Shark250 · 12-17-2018, 08:33 PM

Got the new kickstand In today ordered it about a month ago now and it was the biggest waste of 14$ ever it’s worse than the broken one.
Seriously I measured and even asked them about the size and it’s about 4 inches shorter than it was supposed to be.
No returns no refund.
Would love for anyone to help me out with this I’m genuinely pissed off.

Shark250 · 11-18-2019, 01:40 AM

Ok I haven’t posted or been on here in a while so quick recap I have a 2016 shark 250 and I love it. I have dipped it purple and it seems plastidiping plastics can stand the test of time (1 season of off-roading and power washing). I have recently upgraded my master cylinder and it took some work but my front breaks are ridiculously good at stopping my bike. I have upgraded to a mikuni carb and I currently have a 110 jet I believe. I think tomorrow before work I’m going to menards or Home Depot and I’m going to get some pvc or rubber tubes and finagle a cold air intake to bypass that worthless air box under the seat. Will post pics in a min. I know probably 7 people will actually read this but ��♂️ This a forum to talk about mods and how we personalize our bikes right.

Shark250 · 11-18-2019, 01:48 AM

Here we go. I know some are ganna hate but I mean when I’m tired of it I can just peal it off

culcune · 11-18-2019, 08:01 AM

It looks good!

Chrisguga · 02-25-2020, 06:31 PM

That bike looks great and I’m personally glad you all are posting about the Bashan because I’m leaning towards buying one!

11-21-2018, 12:22 AM	#19
culcune Join Date: May 2006 Location: Yuma, Arizona Posts: 9,056	Surely you can find one similar? $140 seems a little steep. Even though Peace Sports only currently imports the Brozz, the Shark should be similar enough that the kickstand will work. Give them a call for a replacement. __________________ "They say that life's a carousel, spinning fast you got to ride it well..." TGB Delivery Scooter 150 TMEC 200 Enduro--carcass is sadly rotting in the backyard
	0

11-21-2018, 10:48 AM	#21
2LZ Join Date: Mar 2010 Location: Volcano, Ca Posts: 7,112	That has to be your basic Hondoid side stand. Even if you find one without the fancy little rubber thing, so be it. Kinda like this: https://www.ebay.com/i/232472054048?chn=ps Or, like NZ says, just bend it back. The biggest mistake folks make with these bikes is trying to get way too specific when attempting to find parts. Search things like "Chinese dirt bike kick stand" and topics like that. There's also CSC. See link. https://store.cscmotorcycles.com/TT2...RAME-s/359.htm __________________ "Light a fire for a man, and you heat him for a day. Light a man on fire, and you heat him for the rest of his life." 2007 Suzuki DRZ400S (SM convert) 2009 Q Link XP 200 1967 BSA B25 250cc Starfire 2022 Royal Enfield Interceptor 650 2023 Royal Enfield Scram 411 1948 Royal Enfield Model G 350
	3

11-18-2019, 08:01 AM	#25
culcune Join Date: May 2006 Location: Yuma, Arizona Posts: 9,056	It looks good! __________________ "They say that life's a carousel, spinning fast you got to ride it well..." TGB Delivery Scooter 150 TMEC 200 Enduro--carcass is sadly rotting in the backyard
	0

09-21-2018, 12:35 AM	#16
Shark250 Join Date: Sep 2018 Posts: 9	Yeah the wind blew it over and the spring shot off and bent the stand completely
	0

09-21-2018, 06:12 PM	#17
Shark250 Join Date: Sep 2018 Posts: 9	No it bent really bad sits at like a 30 degree angle now anyone have a spare they could mail me haha I’ll pay shipping! Or an alternative that I could buy
	0

12-17-2018, 08:33 PM	#22
Shark250 Join Date: Sep 2018 Posts: 9	Got the new kickstand In today ordered it about a month ago now and it was the biggest waste of 14$ ever it’s worse than the broken one. Seriously I measured and even asked them about the size and it’s about 4 inches shorter than it was supposed to be. No returns no refund. Would love for anyone to help me out with this I’m genuinely pissed off.
	0

11-18-2019, 01:40 AM	#23
Shark250 Join Date: Sep 2018 Posts: 9	Ok I haven’t posted or been on here in a while so quick recap I have a 2016 shark 250 and I love it. I have dipped it purple and it seems plastidiping plastics can stand the test of time (1 season of off-roading and power washing). I have recently upgraded my master cylinder and it took some work but my front breaks are ridiculously good at stopping my bike. I have upgraded to a mikuni carb and I currently have a 110 jet I believe. I think tomorrow before work I’m going to menards or Home Depot and I’m going to get some pvc or rubber tubes and finagle a cold air intake to bypass that worthless air box under the seat. Will post pics in a min. I know probably 7 people will actually read this but ��♂️ This a forum to talk about mods and how we personalize our bikes right.
	2

11-18-2019, 01:48 AM	#24
Shark250 Join Date: Sep 2018 Posts: 9	Here we go. I know some are ganna hate but I mean when I’m tired of it I can just peal it off
	2

02-25-2020, 06:31 PM	#26
Chrisguga Join Date: Feb 2020 Posts: 187	That bike looks great and I’m personally glad you all are posting about the Bashan because I’m leaning towards buying one!
	1