Apollo db36

Imnotathug · 10-07-2019, 12:45 PM

Greetings,
I got a Apollo db36 250cc a while back and I stupidly got the deluxe. Its the road legal version. As soon as i got it i realized the regular offroad version is what i really wanted. Long story short, i ordered the 21 and 18 in wheel hub, tire and tubes. After installing the sprocket and brake discs, i realized the front wheel axel from the deluxe does not fit in the new wheel hub! Anywho, i thought I could just go buy a new axel at my local shop until I checked the axel size. The new thinner axel that fits the new wheel will be way skinny on the forks. Did I just waste a bunch of time on getting new wheels? I am not gonna replace the whole front end.

franque · 10-07-2019, 03:37 PM

Check bearing dimensions and axle dimensions, you might be able to make something work with the original axles. Or you could probably relace the stock hub to work with the 21" wheel and spokes.

Imnotathug · 10-09-2019, 04:11 PM

What do you mean relace the hub? Like make the hole bigger?

**JerryHawk250** · 10-09-2019, 04:22 PM

From what you stated it sounds like you have different diameter in the axles. Just swap bearings in the hub if you can do it without damaging them. Unless the outside diameter of the bearings are different that should work.

AresROC · 10-09-2019, 04:52 PM

Quote:

Originally Posted by JerryHawk250

From what you stated it sounds like you have different diameter in the axles. Just swap bearings in the hub if you can do it without damaging them. Unless the outside diameter of the bearings are different that should work.

I think there is also inner axle tube, brake disk offset, wheel speed sensor & seal/bushing to worry about.

Personally I would just lace a nice, new aluminum wheel with matching spokes on stock hub. In fact I am thinking about getting an Apollo 36 and do it! ^_^

**JerryHawk250** · 10-09-2019, 05:01 PM

Quote:

Originally Posted by AresROC

I think there is also inner axle tube, brake disk offset, wheel speed sensor & seal/bushing to worry about.

Personally I would just lace a nice, new aluminum wheel with matching spokes on stock hub. In fact I am thinking about getting an Apollo 36 and do it! ^_^

Very true. We just don't know how much else is different. Might be easier just swapping the rims and lacing them onto the new hub.

10-07-2019, 12:45 PM	#1
Imnotathug Join Date: Oct 2019 Posts: 2	Apollo db36 Greetings, I got a Apollo db36 250cc a while back and I stupidly got the deluxe. Its the road legal version. As soon as i got it i realized the regular offroad version is what i really wanted. Long story short, i ordered the 21 and 18 in wheel hub, tire and tubes. After installing the sprocket and brake discs, i realized the front wheel axel from the deluxe does not fit in the new wheel hub! Anywho, i thought I could just go buy a new axel at my local shop until I checked the axel size. The new thinner axel that fits the new wheel will be way skinny on the forks. Did I just waste a bunch of time on getting new wheels? I am not gonna replace the whole front end.
	0

10-09-2019, 04:22 PM	#4
JerryHawk250 Moderator Join Date: Oct 2016 Location: Houma, La. Posts: 11,713	From what you stated it sounds like you have different diameter in the axles. Just swap bearings in the hub if you can do it without damaging them. Unless the outside diameter of the bearings are different that should work. __________________ 2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel
	0

10-07-2019, 03:37 PM	#2
franque Join Date: Nov 2017 Location: Marseille, France -> Conakry, Guinea Posts: 1,481	Check bearing dimensions and axle dimensions, you might be able to make something work with the original axles. Or you could probably relace the stock hub to work with the 21" wheel and spokes.
	0

10-09-2019, 04:11 PM	#3
Imnotathug Join Date: Oct 2019 Posts: 2	What do you mean relace the hub? Like make the hole bigger?
	0