08-29-2019, 10:14 PM | #1 |
Join Date: Jun 2019
Posts: 27
|
hawk 250 front rim
alright guys, anyone else have anything like this happen to them? i'm in first gear making a sharp turn (in grass!!) and my front rim folds like a taco! so bad i could barely push the bike with the help of my son and he is huge. spokes also bent. cheapest i could find replacement is $135.00. anyone know a cheaper place? tire and disc seem to be ok.
thanks!!!
__________________
2019 Black Hawk 250 (PZ30 Keihin carburetor, 110 main, 45 slow. 17/50 Sprockets, NGK D8EA/2120 spark Plug) |
|
08-30-2019, 07:55 AM | #2 |
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,707
|
TXpowerports or RPS are the only two places I know of and they are over priced @ $135. CSC has the TT250 front wheel assemble for $95 but don't know if it will be an exact fit. https://store.cscmotorcycles.com/Pro...2D100&CartID=1
Buying a new rim and spokes to lace on will run you about the same as the stock wheel but will end up with a better wheel.
__________________
2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel |
|
08-30-2019, 09:53 AM | #4 |
Join Date: Jun 2016
Location: Hell
Posts: 2,408
|
Maybe Bashan enforcer or the early blue eagle?
The non usd front end version Try the sponser 250bross.com or look up top for their banner |
|
08-30-2019, 10:58 PM | #5 |
Join Date: Jun 2019
Posts: 27
|
rps want $200.00! that's a lot. everyone else seems to be out of stock.
__________________
2019 Black Hawk 250 (PZ30 Keihin carburetor, 110 main, 45 slow. 17/50 Sprockets, NGK D8EA/2120 spark Plug) |
|
08-31-2019, 10:56 PM | #7 |
Join Date: Jun 2019
Posts: 27
|
make of front rim
what make did you choose for front rim? and where and what size spokes did you get? i don't know much about dirt bikes but i can turn a wrench. sorry to be a pain. thanks!
__________________
2019 Black Hawk 250 (PZ30 Keihin carburetor, 110 main, 45 slow. 17/50 Sprockets, NGK D8EA/2120 spark Plug) |
|
09-01-2019, 06:02 PM | #8 |
Join Date: Aug 2018
Posts: 158
|
I used the stock spokes and nuts, they worked fine although I had to cut some of the spoke ends because the pocket is a slight bit deeper. 21 x1.6 tusk aluminum rim
https://www.rockymountainatvmc.com/t...ct-rim-front-p for the vehicle I put a honda crf 450. that will give you the right size for the 21 inch wheel. Itll take a couple hour to do it bu our geta much stronger wheel. |
|
09-01-2019, 10:14 PM | #9 |
Join Date: Jun 2019
Posts: 27
|
rim is ordered, thanks for all the help!!!!! was it difficult to cut off excess spoke? did all them need trimming??
__________________
2019 Black Hawk 250 (PZ30 Keihin carburetor, 110 main, 45 slow. 17/50 Sprockets, NGK D8EA/2120 spark Plug) |
|
|
|
|
|