Electrical upgrade?

SensuBeanCartel · 03-04-2019, 04:38 PM

I saw on another post about heated grips that was long dead about an electrical upgrade.

A long time ago I purchased the stator, voltage rectifier, and flywheel. Why kind of rewiring would be necessary, what kind of things should I be worried about ? is there a voltage regulator as well that i am missing?

I understand the cdi will need to be replaced as well, however shy of the wires that are directly connected to the stator itself will i need to make any other adjustments?

NzBrakelathes · 03-04-2019, 09:24 PM

Shouldn’t need anything more then maybe plugs at rectifier

SensuBeanCartel · 03-05-2019, 01:42 AM

Hmmmmm, so anything directly connected needs to be altered since it would be on a different system (dc) while the battery and accessories on the bike should be ok? I think that’s what I’m gathering, however I really suck st electrical , never did like physics.

SensuBeanCartel · 03-05-2019, 01:54 AM

Found these connectors, not sure what they’re called as I’m more familiar with molex fittings , but they look to be the kind used in the hawk.

Swpeet 700Pcs Automotive Electrical Wire Connectors Kit, 2.8mm 2 3 4 6 9 Pin Automotive Electrical Wire Connectors Pin Header Crimp Wire Terminals and 30 Kits 4mm Car Motorcycle Bullet Terminal Wire https://www.amazon.com/dp/B07DL6WRLP..._34GFCb8HAD1XW

NzBrakelathes · 03-05-2019, 06:29 AM

The connectors are used on many bikes but normal wires and not the rectifier.
What colors come out of you original stator? I would think you already have SC but....... 3 yellow wires? or several different colors and 1 being red? then AC I think that it

SensuBeanCartel · 03-05-2019, 11:08 AM

3 yellow out of one side the other side has one blue white and green I believe

NzBrakelathes · 03-05-2019, 07:21 PM

Quote:

Originally Posted by SensuBeanCartel

3 yellow out of one side the other side has one blue white and green I believe

That then is a common DC

03-04-2019, 04:38 PM	#1
SensuBeanCartel Join Date: Feb 2019 Posts: 74	Electrical upgrade? I saw on another post about heated grips that was long dead about an electrical upgrade. A long time ago I purchased the stator, voltage rectifier, and flywheel. Why kind of rewiring would be necessary, what kind of things should I be worried about ? is there a voltage regulator as well that i am missing? I understand the cdi will need to be replaced as well, however shy of the wires that are directly connected to the stator itself will i need to make any other adjustments?
	0

03-04-2019, 09:24 PM	#2
NzBrakelathes Join Date: Jun 2016 Location: Hell Posts: 2,408	Shouldn’t need anything more then maybe plugs at rectifier
	0

03-05-2019, 01:42 AM	#3
SensuBeanCartel Join Date: Feb 2019 Posts: 74	Hmmmmm, so anything directly connected needs to be altered since it would be on a different system (dc) while the battery and accessories on the bike should be ok? I think that’s what I’m gathering, however I really suck st electrical , never did like physics.
	0

03-05-2019, 01:54 AM	#4
SensuBeanCartel Join Date: Feb 2019 Posts: 74	Found these connectors, not sure what they’re called as I’m more familiar with molex fittings , but they look to be the kind used in the hawk. Swpeet 700Pcs Automotive Electrical Wire Connectors Kit, 2.8mm 2 3 4 6 9 Pin Automotive Electrical Wire Connectors Pin Header Crimp Wire Terminals and 30 Kits 4mm Car Motorcycle Bullet Terminal Wire https://www.amazon.com/dp/B07DL6WRLP..._34GFCb8HAD1XW
	0

03-05-2019, 06:29 AM	#5
NzBrakelathes Join Date: Jun 2016 Location: Hell Posts: 2,408	The connectors are used on many bikes but normal wires and not the rectifier. What colors come out of you original stator? I would think you already have SC but....... 3 yellow wires? or several different colors and 1 being red? then AC I think that it
	0

03-05-2019, 11:08 AM	#6
SensuBeanCartel Join Date: Feb 2019 Posts: 74	3 yellow out of one side the other side has one blue white and green I believe
	0