Where can I get a Vader 125 rear axle?

bman393 · 11-13-2017, 11:29 PM

I recently put on a new sprocket and chain just to strip my axle head. Ive looked all over the place, but can't find an axle that will fit. I've tried calling powerdirtbikes, but they never respond. Anyone know where i can get a rear axle????

maldoj2 · 11-14-2017, 12:37 PM

honda grom use the same axle

bman393 · 11-14-2017, 01:01 PM

Quote:

Originally Posted by maldoj2

honda grom use the same axle

Are you sure? That’d be sweet if so. I thought they were a little shorter?

Jamesfl · 11-20-2017, 11:41 AM

100% Positive. I just replacement mine with a Grom axle. The engine mounting bolts are a different matter thou.

JoeRivers · 09-17-2018, 05:10 AM

Im pretty sure Mcmaster sells bolts in the same size as the axle. I was looking into it a while ago, they were like 30 bucks.

RedCrowRides · 09-17-2018, 09:56 AM

Honda Grom axle fits fine, I have one in my 2018 Gen2 Vader. Bike Bandit has the axle, nut, and washer in stock ,follow this link these are the exact parts I used :https://www.bikebandit.com/oem-parts...5498#sch795598

You need a 6, 10, and 12 on the diagram, total cost of parts is 10-12 bucks or so, plus shipping ,the axle is a lot stronger / better quality than the Chinese original.

cbrfxr67 · 09-17-2018, 12:39 PM

Swapped my rear axle bolt awhile back with Grom bolt. A ok

kirbo7106 · 09-17-2018, 02:04 PM

After all the stories and posts, I ordered the rear axle, swing arm and front axle bolts for a Grom from a Honda supply store!

Failure is not an Option!

11-13-2017, 11:29 PM	#1
bman393 Join Date: Nov 2017 Posts: 9	Where can I get a Vader 125 rear axle? I recently put on a new sprocket and chain just to strip my axle head. Ive looked all over the place, but can't find an axle that will fit. I've tried calling powerdirtbikes, but they never respond. Anyone know where i can get a rear axle????
	0

09-17-2018, 09:56 AM	#6
RedCrowRides Join Date: Jun 2018 Location: Florida Posts: 759	Honda Grom axle fits fine, I have one in my 2018 Gen2 Vader. Bike Bandit has the axle, nut, and washer in stock ,follow this link these are the exact parts I used :https://www.bikebandit.com/oem-parts...5498#sch795598 You need a 6, 10, and 12 on the diagram, total cost of parts is 10-12 bucks or so, plus shipping ,the axle is a lot stronger / better quality than the Chinese original. __________________ 2001 Mustang GT 2004 Sportster 2018 VADER 2020 Orion RXB250L
	0

09-17-2018, 12:39 PM	#7
cbrfxr67 Join Date: Jun 2018 Location: HOuston Posts: 357	Swapped my rear axle bolt awhile back with Grom bolt. A ok __________________ BD125-15
	0

09-17-2018, 02:04 PM	#8
kirbo7106 Join Date: Feb 2017 Location: Holiday, Florida Posts: 672	After all the stories and posts, I ordered the rear axle, swing arm and front axle bolts for a Grom from a Honda supply store! Failure is not an Option! __________________ Dan-O -2018 Tao Tao HellCat - DOA -2016 Hawk 250 - Kitty Hawk - eBay exhaust, Mikuni carb(120 main/30 Pilot), airbox mod with K&N filter, digital cluster, total LEDs, 17/45 sprockets, RK chain, Shinko 244 tires, trunk, aftermarket levers, burrito tube, skid plate, Sargent Cycle Seat... -2003 HD Sportster 100th Anniversary -1999 Buell X-1 Lightning - Race kit, Buell Seat
	3

11-14-2017, 12:37 PM	#2
maldoj2 Join Date: May 2017 Location: puerto rico Posts: 24	honda grom use the same axle
	0

11-20-2017, 11:41 AM	#4
Jamesfl Join Date: Oct 2017 Posts: 13	100% Positive. I just replacement mine with a Grom axle. The engine mounting bolts are a different matter thou.
	0

09-17-2018, 05:10 AM	#5
JoeRivers Join Date: Sep 2018 Posts: 24	Im pretty sure Mcmaster sells bolts in the same size as the axle. I was looking into it a while ago, they were like 30 bucks.
	0