Rhino’s be here

Computek · 05-06-2018, 12:25 AM

Got my two Rhino’s in from Txpowersports Friday.
Started putting them together, no surprises so far.
The build date on them is 12/17. The only change seems to be that the bulky tail lamp is now a smaller led unit. Tag says 197cc, haven’t checked that on the engine yet.

Computek · 05-06-2018, 03:22 PM

Well I found the swing arm wasn’t tight. Trivial matter.

Paul2 · 05-07-2018, 07:43 AM

I have 2, one for me and one for my son, Just new last may, lets see how yours do.
oh ya, triple check the frame bolts..

uphill · 05-07-2018, 05:49 PM

Yep, second that from Paul, and Loctite blue on everything. Although they seem to be applying something like Locite tape now on the bolts already installed in crate. I got mine in Nov., and they had it applied. So we just put the blue on everything needed for assembly.

Another thing I recommend close inspection on, is the rear brake switch. Look real closely at that puppy for cracks in the plastic housing! Apparently they can break easily, probably during shipping and/or assembly. If it even halfway breaks, you can be blowing fuses and wondering what's going on. Gorilla tape will do in a pinch. Just wrap it up to hold til you get another one if needed.

Computek · 05-08-2018, 09:40 PM

Mine came with a large number of nylock style nuts. I was rather surprised. I also got a machined aluminum gas cap. The headlights are led (haven’t check how well they work) as is what seems to be a new led tail light. What I found wrong out of the crate is the front seat “u” clip is cracked and I will have to create/reinforce a replacement.
The carburetor has a float issue, started leaking fuel out of the overflow after the second ride. The unit either has a sticky float or it’s not set right as it idles a tad wonky.
Pretty happy with it so far, going to start putting the second Rhino together this weekend. Like Paul I bought two of them!

lilneowhat13 · 08-12-2018, 10:42 PM

Just ordered my rhino 250. Will post when it comes, should be about 5 days or so. Amazon, 1800.00

Paul2 · 08-13-2018, 09:29 AM

Just remember.....Once you get it, relax, get coffee, put the kids in a shed somewhere, the ex in a cement filled barrel, and get a few wrench's and double check the tightness on EVERY bolt including frame ones that are commonly missed.
or not, but please do the ex n cement barrel for me, lol

Al · 08-13-2018, 11:49 AM

Lol sooooo true!!!

Mudflap · 08-13-2018, 12:20 PM

Mine had no loose bolts but did have a few other problems. There is a thread about what has gone wrong with the Rhino. If you have the time and knowledge I recommend repacking all wheel bearings while assembling the quad.

05-07-2018, 07:43 AM	#3
Paul2 Join Date: Jun 2017 Posts: 81	I have 2, one for me and one for my son, Just new last may, lets see how yours do. oh ya, triple check the frame bolts..
	1

05-07-2018, 05:49 PM	#4
uphill Join Date: Oct 2017 Posts: 63	Yep, second that from Paul, and Loctite blue on everything. Although they seem to be applying something like Locite tape now on the bolts already installed in crate. I got mine in Nov., and they had it applied. So we just put the blue on everything needed for assembly. Another thing I recommend close inspection on, is the rear brake switch. Look real closely at that puppy for cracks in the plastic housing! Apparently they can break easily, probably during shipping and/or assembly. If it even halfway breaks, you can be blowing fuses and wondering what's going on. Gorilla tape will do in a pinch. Just wrap it up to hold til you get another one if needed.
	1

05-08-2018, 09:40 PM	#5
Computek Join Date: May 2018 Location: Central MS Posts: 29	Mine came with a large number of nylock style nuts. I was rather surprised. I also got a machined aluminum gas cap. The headlights are led (haven’t check how well they work) as is what seems to be a new led tail light. What I found wrong out of the crate is the front seat “u” clip is cracked and I will have to create/reinforce a replacement. The carburetor has a float issue, started leaking fuel out of the overflow after the second ride. The unit either has a sticky float or it’s not set right as it idles a tad wonky. Pretty happy with it so far, going to start putting the second Rhino together this weekend. Like Paul I bought two of them!
	0

08-12-2018, 10:42 PM	#6
lilneowhat13 Join Date: Aug 2018 Posts: 7	Just ordered my rhino 250. Will post when it comes, should be about 5 days or so. Amazon, 1800.00
	0

08-13-2018, 09:29 AM	#7
Paul2 Join Date: Jun 2017 Posts: 81	Just remember.....Once you get it, relax, get coffee, put the kids in a shed somewhere, the ex in a cement filled barrel, and get a few wrench's and double check the tightness on EVERY bolt including frame ones that are commonly missed. or not, but please do the ex n cement barrel for me, lol
	1

08-13-2018, 11:49 AM	#8
Al Join Date: Jun 2017 Posts: 73	Lol sooooo true!!!
	0

08-13-2018, 12:20 PM	#9
Mudflap Join Date: Sep 2014 Posts: 1,930	Mine had no loose bolts but did have a few other problems. There is a thread about what has gone wrong with the Rhino. If you have the time and knowledge I recommend repacking all wheel bearings while assembling the quad.
	1