|
|
|
|
Thread Tools | Search this Thread | Display Modes |
|
05-22-2018, 08:19 AM | #1 |
Join Date: Jun 2016
Posts: 11
|
Depth for Holes to Receive Exhaust Studs
That's right. The machine shop guy said standard practice is to go to a depth 1.5 times the diameter of the replacement stud. I did and the depth of the metal in the head was sufficient to take it.
Good luck. It was tricky to drill the holes perpendicular to the face but I got them close enough to work. |
|
|
|
Tags |
magician, magician 250cc |
|
|