Brozz electrical issue! - Page 2

**JerryHawk250** · 06-02-2017, 03:06 PM

Quote:

Originally Posted by joker

Thank you I'll check once I'm out of work!

Should look like this one ( picture by hertz9753)

Ariel Red Hunter · 06-02-2017, 03:13 PM

Quote:

Originally Posted by joker

Hello so I just purchased a new battery but for some reason I can't get any power. I can kick start the bike and everything lights up but no power when I turn the key and use the battery to start it. Please any suggestions?

One of the first things to check is the battery ground, where it attaches to the frame. Just because it looks good does not mean that it is good. Often, there is paint on the frame whwere the battery ground is attached. Paint is a so-so insulator. It will permit a low watt current to come back from the frame, but the paint stops the high wattage pull of the starter motor...ARH

goat67 · 06-07-2017, 09:57 AM

Reconnect or enable the remote and then try to use it to start the bike.
I had an issue where I needed to do this to get it to start with the starter, also.

06-07-2017, 09:57 AM	#18
goat67 Join Date: Mar 2017 Location: Twin Cities MN Posts: 525	Reconnect or enable the remote and then try to use it to start the bike. I had an issue where I needed to do this to get it to start with the starter, also. __________________ 2016 Brozz
	0