Quote:
Originally Posted by FLASHLIGHTBOY
ok.. make sure your ale spread is the same distance from the front rim to the rear rim on each side.... this also helps the chain adjustment... next make sure the toe in is the same front of tire .. left to right .. and then measure the back of the steer axle tires .. make them the same distance... check you tube for how to do wheel alignment on atv.. these are just Chimese kids atvs... they do not need any extra toe in or toe out... make them the same... then it wil steer good... last but really important .... make sure the air pressure is the same in all tires as this will make the tire taller and bigger... casing it to pul side to side...
|
Yesterday I noted that the tie rods are positioned correctly as someone mentioned. I'll check the toe-in.