12-09-2015, 01:58 PM | #16 |
Join Date: Sep 2014
Location: Arvada, CO
Posts: 1,004
|
About 1000 miles. There was no noticeable performance loss while the adjuster was backing out, so I didn't know anything was wrong until the foot popped off and started rattling around.
I did notice I was starting to collect more fuel in the PCV catch tube. But that may have been extra condensation on the cylinder wall from the colder weather. It will be interesting to see if that changes with proper intake valve adjustment.
__________________
Red 5 standing by! 2015 CSC red RX3 with 19" front wheel, Shinko 804/805, skid plate, tall seat, 13T/45T sprockets, progressive shock, Winyoochanok windshield, GENSSI LED headlight, SW-Motech tankbag, Shorai Lithium battery 2014 Ural Patrol |
|
12-10-2015, 10:05 AM | #17 |
Join Date: Oct 2015
Location: vermont
Posts: 238
|
it is possible to over tighten the jam nut when you do your valve adj. have not done mine yet only 100 miles, but i imagine not a very large dia. on adj. you want it tight but not strong like bull smart like tractor tight you can do damage by cranking down on nut like it was a large bolt
|
|
12-10-2015, 11:44 AM | #18 | |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
Quote:
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
|
12-10-2015, 12:28 PM | #19 |
Join Date: Oct 2015
Location: White Mtns. NH
Posts: 488
|
__________________
2016 Versys 650 LT, 2015 RX3 Red, 2011 Ural GearUp, |
|
03-19-2016, 06:54 PM | #20 | |
Join Date: Jul 2015
Location: Tigbauan, Iloilo City, Panay Island, Philippines
Posts: 177
|
Quote:
My dealer Motorstar didn't have the bearings in stock and could not locate or "order" them. They provide no service and only aggravation.
__________________
Riceburner Robin / Face Hunter I Medical Mission Matters www.medicalmissionmatters.org |
|
|
03-19-2016, 07:29 PM | #21 | |
Join Date: Oct 2015
Location: FL, GA, NC
Posts: 771
|
Quote:
I tried unsuccessfully to find some self locking nuts for my TW200, since I had one unscrew itself. Any chance that the ones from the Ural will fit. My TW is in NC, so I can't easily check the size. EDIT Nevermind, Keith. Found it. M4 fine pitch. jb
__________________
2016 Honda CB500F......2017 Triumph Street Twin 2014 XT 250........ Last edited by jbfla; 03-19-2016 at 09:42 PM. |
|
|
|
|
|
|