08-29-2015, 03:34 PM
|
#1 |
|
Join Date: Aug 2015
Location: Fort Benning GA
Posts: 3
|
Xf200 sprocket
Sooooo I wanted to get on the 16t front sprocket team to get a little more MPH out of my bike and bought this sprocket thinking it would just bolt right up
http://www.whygostock.com/xf200-xp20...-enduro-qlink/ Didn't bother to take the old one off first and measure it  . Come to find out today that the 11.5mm width isn't gonna fit and that I will need to grind off the little part that sticks out. So now I'm waiting till payday to buy a decent angle grinder. Too bad there isn't a harbor freight where I live. |
|
|
08-29-2015, 07:53 PM
|
#2 |
Join Date: Mar 2008
Posts: 2,436
|
http://www.jtsprockets.com/catalogue/sprocket/JTF409
Ask here 1st saves u from that hassle ...
__________________
|
|
|
|
08-29-2015, 09:07 PM
|
#3 |
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
|
Indeed, one should always check the online catalog at JT Sprockets for sprocket dimensions.
__________________
Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894 |
|
|
|
|
|
 |
| Tags |
| qlink |
|
|
Linear Mode
