12-07-2014, 05:17 AM | #1 |
Join Date: Sep 2014
Posts: 58
|
cg200 waterpump gear
Have had cooling problems .fan stopped .engine popping at high rpm .water use . overflow tank venting continuously .radiator leak checked and fixed.new electric fan . removed water pump cover and found that there was no resistance , so pulled side off engine. Nothing major 13 screws clutch cable foot well ,peg and other crap ,got to the guts and found inner gear stripped , so deciding whether to fix this up or just get a new motor , this still runs fine but I am concerned that the heat may cause some issues later on ,plus how and where to find water pump gear cheap enuf
|
|
12-07-2014, 06:19 AM | #2 |
Join Date: Mar 2008
Posts: 2,436
|
__________________
|
|
12-07-2014, 05:43 PM | #3 |
Join Date: Sep 2014
Posts: 58
|
Cheers but that site is in Chinese , wondering if I should just put it back together without the pump and see what happens
|
|
12-07-2014, 11:57 PM | #4 | |
Join Date: Jan 2012
Location: ChCh , NZ
Posts: 2,265
|
Quote:
never figgered out why they cool a motor.... just extra weight..
__________________
09 XT660R ... 06 TTR250 ... 80 Montesa H6 125 Enduro... 77 Montesa Cota 348 MRR "Malcom Rathnell Replica"... Current resto projects.. 81 Honda CT110... 80 Kawasaki KL250A1... 11 Husaburg TE125 enduro... "sold" along with another 31... Lifan 125 Pitbike.. "stolen" ... KIWI BIKER FORUM...... http://www.kiwibiker.co.nz/forums/content.php All the best offroad rides in NZ... http://www.remotemoto.com/ E-mail... xtpete1@gmail.com |
|
|
12-08-2014, 12:06 AM | #5 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
I suspect that it'll struggle without the cooling system, since there are no cooling fins on that cylinder. You could certainly convert it to air cooled.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
12-08-2014, 11:16 AM | #6 |
Join Date: May 2009
Location: SASKATOON
Posts: 1,161
|
Water pump
You can try CHINAPARTSDEPOT in Vancouver... Check their site on the web for ph#.. he has parts for everything... major parts supplier
__________________
DEALER FOR ZSTAR & GIO PRODUCTS, TAOTAO ABIBABA ATV ETC |
|
12-08-2014, 04:34 PM | #7 |
Join Date: Sep 2014
Posts: 58
|
Thanks flash I,all try them , I,m having no luck finding a replacement gear on the net , and there definitely won't be any here in tasmania ,can u just buy a finned cylinder and make it air cooled (piston as well)
|
|
12-08-2014, 08:48 PM | #8 |
Join Date: Mar 2008
Posts: 2,436
|
burge is in Australia. If can't find it locally, buy from China seems the LAST resort. OZ & parts: http://www.chinariders.net/showthread.php?t=10750 btw: taobao.com had official forwarder to OZ if READS chinese (NO agent NEEDed) Y85 (1st kg) + Y26 /.5 kg http://www.taobao.com/go/chn/transit...0.0.0.0.wYcn2v
---
__________________
|
|
12-09-2014, 04:28 AM | #9 |
Join Date: Sep 2014
Posts: 58
|
Cheers HB
|
|
|
|
|
|