Beast rear axel bearings

TYE · 05-30-2014, 09:22 PM

Hey guys, so I guess I've been putting a lot of clicks on my beast lately and I've started to notice some alignment issues. After reading up on some tuning guides I've got the front end rolling real nice but the rear is a different story. After a lot of issues with the chain popping off and not being able to set the chain strait I've realized there is some play in the rear axel bearings. Every time I need to fix or replace a part on this atv I always try to upgrade the stock parts. Both ebay and gio have the replacement part for about $100 but I'm wondering if any has found a better option like a yamaha bearing that fits like the swingarm bushings do. Or can I just get the bearings instead of the whole axel hub? Any suggestions are much appreciated. Thanks

Weldangrind · 05-31-2014, 01:04 AM

This is some info on the bearings: http://www.chinariders.net/showthrea...east+rear+axle

TYE · 05-31-2014, 01:21 AM

Awesome! Thank you

05-30-2014, 09:22 PM	#1
TYE Join Date: May 2010 Location: waterdown Posts: 90	Beast rear axel bearings Hey guys, so I guess I've been putting a lot of clicks on my beast lately and I've started to notice some alignment issues. After reading up on some tuning guides I've got the front end rolling real nice but the rear is a different story. After a lot of issues with the chain popping off and not being able to set the chain strait I've realized there is some play in the rear axel bearings. Every time I need to fix or replace a part on this atv I always try to upgrade the stock parts. Both ebay and gio have the replacement part for about $100 but I'm wondering if any has found a better option like a yamaha bearing that fits like the swingarm bushings do. Or can I just get the bearings instead of the whole axel hub? Any suggestions are much appreciated. Thanks __________________ modsz30 carb, 110 main,22.5 pilot,ngk race coil wire and plug dr8es-l, no rev cdi, monster muffler
	0

05-31-2014, 01:04 AM	#2
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	This is some info on the bearings: http://www.chinariders.net/showthrea...east+rear+axle __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

05-31-2014, 01:21 AM	#3
TYE Join Date: May 2010 Location: waterdown Posts: 90	Awesome! Thank you __________________ modsz30 carb, 110 main,22.5 pilot,ngk race coil wire and plug dr8es-l, no rev cdi, monster muffler
	0