My ATV

ActionJaxxon · 05-06-2007, 01:23 AM

Hey new england trails,
thought i would start a new thread and post some pics of my ATV and the exhaust i got made for it. The ATV is a dragon 250 watercooled, 10" rims, cost $2200 aussie and the exhaust was $450 how do the prices/ATV compare to what you guys have there?

culcune · 05-06-2007, 12:23 PM

Our quads only cost $50.00 US! OK, just kidding. Your prices are probably in line with what we pay here. Do you know who makes the "Dragon?" (I assume that Dragons are an Aussie importer like our Roketa or Jetmoto brands). Nice quad, by the way!

TeamCheap · 05-06-2007, 12:39 PM

So did that pipe make a big difference or what?

Have you done anything else to it?

Looks nice.
I battled with buying a chinese quad or just piecing together an old Honda 250x/300ex and went with the honda. (I may regret that

)

I wanted to try one of these even though it is only a 200cc.

Looking at your quad and the one I posted they look very similar, hmmm this sells here for around $2000.

ActionJaxxon · 05-07-2007, 07:31 AM

not sure who makes them Culcune, seen a few very similar tho. looks near identical to that yellow one Teamcheap except for that spekky digital speedo! All i have done so far is the pipe and re-jetted it to suit(made a far amount of difference as the original one was small and restrictive and didnt match the port), a foam unifilter and changed the front sprocket from a 17t to a 15t and an rk chain. These engines run an overhead pushrod setup with a single lobe cam that runs off the crank apparently but i am going to look into getting it built up and increasing the cam duration. next will be seeing if i can find an equivilant piston in some aftermarket range like wiseco and checkout how much bigger i can go, as well as porting the head. It goes pretty good as it is but i am going to need to look into some new tires for it soon as my frequent donuts and wheel spinning are taking its toll :oops: , so anyone have any suggestions on brands?

waywest · 07-28-2007, 04:51 AM

how has this quad been?.This looks like one I'm considering gettting.

ronbartos · 07-28-2007, 04:18 PM

Who makes your Atv. I tryed pulling some information on dragon 250 watercooled all the pic's I find don't look like yours at all.

kczukiman · 07-28-2007, 11:23 PM

It sort of looks like a jetmoro.Does it have front disc brakes?

AZ200cc · 07-28-2007, 11:37 PM

Resembles a roketa....In ways. :?

http://www.dirtridersales.com/images/121111.jpg

But I think it is a Jet Moto...

http://www.kidsmotosport.com/jetmoto/JET200ATV.jpg

05-06-2007, 01:23 AM	#1
ActionJaxxon Join Date: Apr 2007 Posts: 7	My ATV Hey new england trails, thought i would start a new thread and post some pics of my ATV and the exhaust i got made for it. The ATV is a dragon 250 watercooled, 10" rims, cost $2200 aussie and the exhaust was $450 how do the prices/ATV compare to what you guys have there?
	0

05-06-2007, 12:23 PM	#2
culcune Join Date: May 2006 Location: Yuma, Arizona Posts: 9,056	Our quads only cost $50.00 US! OK, just kidding. Your prices are probably in line with what we pay here. Do you know who makes the "Dragon?" (I assume that Dragons are an Aussie importer like our Roketa or Jetmoto brands). Nice quad, by the way! __________________ "They say that life's a carousel, spinning fast you got to ride it well..." TGB Delivery Scooter 150 TMEC 200 Enduro--carcass is sadly rotting in the backyard
	0

07-28-2007, 11:37 PM	#8
AZ200cc Join Date: Apr 2007 Location: Show Low Arizona Posts: 2,889	Resembles a roketa....In ways. :? http://www.dirtridersales.com/images/121111.jpg But I think it is a Jet Moto... http://www.kidsmotosport.com/jetmoto/JET200ATV.jpg __________________ <br />2001 Suzuki DR200SE<br />1997 Suzuki RM250 YIKES<br />1995 Yamaha Breeze 125 daughters<br />1991 Honda XR80r Restored<br />maybe a 2003 Yamaha TTR90
	0

05-06-2007, 12:39 PM	#3
TeamCheap Join Date: Jun 2006 Location: directly under the earths sun............NOW Posts: 2,302	So did that pipe make a big difference or what? Have you done anything else to it? Looks nice. I battled with buying a chinese quad or just piecing together an old Honda 250x/300ex and went with the honda. (I may regret that ) I wanted to try one of these even though it is only a 200cc. Looking at your quad and the one I posted they look very similar, hmmm this sells here for around $2000.
	0

05-07-2007, 07:31 AM	#4
ActionJaxxon Join Date: Apr 2007 Posts: 7	not sure who makes them Culcune, seen a few very similar tho. looks near identical to that yellow one Teamcheap except for that spekky digital speedo! All i have done so far is the pipe and re-jetted it to suit(made a far amount of difference as the original one was small and restrictive and didnt match the port), a foam unifilter and changed the front sprocket from a 17t to a 15t and an rk chain. These engines run an overhead pushrod setup with a single lobe cam that runs off the crank apparently but i am going to look into getting it built up and increasing the cam duration. next will be seeing if i can find an equivilant piston in some aftermarket range like wiseco and checkout how much bigger i can go, as well as porting the head. It goes pretty good as it is but i am going to need to look into some new tires for it soon as my frequent donuts and wheel spinning are taking its toll :oops: , so anyone have any suggestions on brands?
	0

07-28-2007, 04:51 AM	#5
waywest Join Date: Jul 2007 Location: San Manuel AZ Posts: 4	how has this quad been?.This looks like one I'm considering gettting.
	0

07-28-2007, 04:18 PM	#6
ronbartos Join Date: Jun 2007 Posts: 9	Who makes your Atv. I tryed pulling some information on dragon 250 watercooled all the pic's I find don't look like yours at all.
	0

07-28-2007, 11:23 PM	#7
kczukiman Join Date: Jul 2007 Location: Independence,Missouri Posts: 1,049	It sort of looks like a jetmoro.Does it have front disc brakes?
	0