04-06-2013, 07:55 AM | #1 |
Join Date: Apr 2013
Posts: 4
|
ZS 250 GS rear sprocket
Hi,
anybody know what honda or other rear sprockets will be compatible with the zongshen 250 gs maxim? I need to go a smaller size as the standard one has the bike over reving at any more than 80km/h. thanks Toby |
|
04-06-2013, 08:05 AM | #2 |
Join Date: May 2007
Location: Altamont, Kansas
Posts: 15,103
|
Welcome toby.
Do you have a picture of the sprocket? I am not too familiar with your bike. Most of us have the dual sports.
__________________
You meet the nicest people on a Honda Clone. |
|
04-06-2013, 12:03 PM | #3 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
Also, can you increase the front sprocket size instead? Much easier / cheaper.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
04-08-2013, 06:21 AM | #4 |
Join Date: Apr 2013
Posts: 4
|
Thanks for replies.
No room to put bigger front sprocket. Picture of rear sprocket attached Not sure how to attach image! |
|
04-08-2013, 06:27 AM | #5 |
Join Date: Apr 2013
Posts: 4
|
[img]/home/toby/Desktop/sprocket.JPG[/img]
|
|
04-08-2013, 06:31 AM | #6 |
Join Date: Apr 2013
Posts: 4
|
2nd attemp
[img]file:///home/toby/Desktop/sprocket.JPG[/img] |
|
04-08-2013, 08:19 AM | #7 |
Join Date: May 2007
Location: Altamont, Kansas
Posts: 15,103
|
Try following these steps for posting pictures. You need to use a outside hosting site like photobucket.
http://chinariders.net/modules.php?n...wtopic&t=11188
__________________
You meet the nicest people on a Honda Clone. |
|
04-08-2013, 03:16 PM | #8 |
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
|
We also need to know three measurements from your rear sprocket, as shown in the diagram below.
Spud
__________________
Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894 |
|
07-11-2013, 05:11 PM | #9 |
Join Date: Jul 2013
Posts: 27
|
buy anything and take it to an lathe worker. takes 10 min to fix center hole and you can drill new holes by youself.
|
|
|
|
|
|