Need a new drill bit - Page 3

waynev · 04-14-2011, 11:12 PM

I'd just use the hole saw, can you clamp a pc of something on the one side of the existing hole so you can use the pilot on the hole saw?

Weldangrind · 04-15-2011, 11:05 AM

Most of the hole saws I've used have not been very accurate, and as well, I haven't investigated a 1-1/16 hole saw. Thanks for the tip; I'll check at my local tool shop. Maybe they have a good quality hole saw that will work.

04-15-2011, 11:05 AM	#32
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	Most of the hole saws I've used have not been very accurate, and as well, I haven't investigated a 1-1/16 hole saw. Thanks for the tip; I'll check at my local tool shop. Maybe they have a good quality hole saw that will work. __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

04-14-2011, 11:12 PM	#31
waynev Join Date: Aug 2009 Location: London, Ontario Posts: 1,097	I'd just use the hole saw, can you clamp a pc of something on the one side of the existing hole so you can use the pilot on the hole saw?
	0