12-10-2009, 08:46 PM | #1 |
Join Date: Dec 2009
Posts: 4
|
Flywing 100cc parts-Piston rings needed
I just bought one of these bikes and it needs a set of rings. anyone have a manual or a link or a phone number to get parts? any help is greatly appreciated?
I've posted info in some other places about parts for this bike on ebay, No rings but lots of used parts available for the 100cc and the 150cc |
|
12-11-2009, 01:53 AM | #2 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
Is it a typical clone of a horizontal Honda?
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
12-11-2009, 04:19 AM | #3 |
Join Date: Jun 2009
Location: orbital platform
Posts: 741
|
http://s179.photobucket.com/albums/w...sort=ascending
It appears so........... The trouble with these things is: they are available in sizes ranging from 50cc to 170cc, to get 100cc there are a few bore and stroke combinations, so you have to measure it up to find out exactly what you need. |
|
12-11-2009, 08:38 AM | #4 |
Join Date: May 2007
Location: Altamont, Kansas
Posts: 15,103
|
It looks just like my baja 90. Same plastics/frame.
Typical honda horizontal clone. The baja is made by hensim. That may help in your search. Also I ordered parts from www.dratv.com before. They may be able to help. They specialize in the honda horizontal engines/clones. If you can't find the rings I would recommend just doing a big bore kit. You likely can find a 107/110 kit for cheap. Allen
__________________
You meet the nicest people on a Honda Clone. |
|
|
|
Thread Tools | Search this Thread |
Display Modes | |
|
|