Noob looking for help

1stTimeDirt · 07-20-2021, 12:37 AM

Does anyone know where I can find information or parts for a 2005 terminator 150gy? I don't even know what kind of oil or oil filter it needs

franque · 07-20-2021, 02:18 AM

It appears to be a copy of a Honda CG125... if that's the case, 10w-40 is fine for it, and there isn't an oil filter in particular. There is an oil slinger that can be cleaned under the right side cover, which must be removed. Inside you'll find a cover that appears to have Phillips head screws on it. They aren't Phillips head, they're a head called JIS.

They look the same, but Phillps heads are designed to cam out with excessive torque, JIS are not, so what will happen is that you'll not be able to remove the screws with a standard Phillips screwdriver, you'll ruin the screws instead and not be able to remove the cover.

To save you the trouble, get a proper JIS #2 screwdriver: https://www.amazon.com/Vessel-Megado...dp/B000TG8OTY/

Mudflap · 07-20-2021, 05:35 AM

Do a Google search for a Honda CG125 factory service manual. Everything except a few measurements will be the same.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-20-2021, 02:18 AM	#2
franque Join Date: Nov 2017 Location: Marseille, France -> Conakry, Guinea Posts: 1,481	It appears to be a copy of a Honda CG125... if that's the case, 10w-40 is fine for it, and there isn't an oil filter in particular. There is an oil slinger that can be cleaned under the right side cover, which must be removed. Inside you'll find a cover that appears to have Phillips head screws on it. They aren't Phillips head, they're a head called JIS. They look the same, but Phillps heads are designed to cam out with excessive torque, JIS are not, so what will happen is that you'll not be able to remove the screws with a standard Phillips screwdriver, you'll ruin the screws instead and not be able to remove the cover. To save you the trouble, get a proper JIS #2 screwdriver: https://www.amazon.com/Vessel-Megado...dp/B000TG8OTY/
	0

07-20-2021, 05:35 AM	#3
Mudflap Join Date: Sep 2014 Posts: 1,933	Do a Google search for a Honda CG125 factory service manual. Everything except a few measurements will be the same.
	1