05-28-2020, 09:59 PM | #1 |
Join Date: May 2020
Posts: 12
|
New carb
Installed a new carb today but on the old air filter box it had a crank case vent hose going into it I think nowhere on new carb or new filter does it have anything to put that hose do I just leave it open to.keep pressure down or do I pit a cork of some kind in it? Thanks in advance
|
|
05-29-2020, 07:52 AM | #2 |
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,710
|
Keep it open to the air. You can pick up a small crank case vent filter at Autozone. https://www.autozone.com/external-en...ter/153665_0_0
__________________
2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel |
|
05-29-2020, 08:08 AM | #3 |
Join Date: Sep 2014
Posts: 1,920
|
The standard way to do it was an open hose that vented an inch or two below the bottom of the engine. Thats what I use on all my bikes. Old cars used the same setup. Don't plug it. A filter is ok too but don't let it get clogged.
|
|
|
|
Thread Tools | Search this Thread |
Display Modes | |
|
|