07-31-2016, 12:08 AM | #61 |
Join Date: Apr 2016
Location: Chesapeake, VA
Posts: 207
|
What?
|
|
07-31-2016, 07:42 AM | #63 | |
Join Date: Jul 2016
Location: Jonesville, NC
Posts: 136
|
Quote:
Jeff |
|
|
07-31-2016, 08:37 PM | #64 |
Join Date: Feb 2016
Location: George West, Texas
Posts: 4,097
|
What good are friends? Do we get coupons for the Outback Steak House?
__________________
***************************************** 2015 Bashan"Blaze" BS250GY-31 (DB-07K-250) GONE 2017 Suzuki V Strom 650 XT "We are all born ignorant, but one must work hard to remain stupid." ~Benjamin Franklin~
|
|
08-01-2016, 02:15 AM | #65 |
Join Date: May 2016
Location: Bismarck, ND
Posts: 868
|
Are you giving out coupons to your backyard?
__________________
2015 and 3/4 RPS Hawk 250. Most people would call it a 2016 but the MCO didn't. |
|
09-02-2016, 01:19 PM | #66 |
Join Date: May 2016
Posts: 583
|
I just discovered that I never updated this thread with photos of the new side covers I got from CSC. My Hawk is a little less green now and the black of the tank extends into the panels. The two pieces were not meant to be the same color, that's why the larger piece has a window slot revealing the smaller piece.
http://www.cscmotorcycles.com/TT250-...p/zt30-103.htm http://www.cscmotorcycles.com/TT250-...p/zt30-109.htm |
|
09-02-2016, 01:30 PM | #67 |
Join Date: May 2016
Posts: 583
|
I previously posted about this, but, it belongs in this thread. On the left is the "fuel sensor" I got from CSC and on the right is the one that came with my Hawk. Is it any wonder the factory sensor was registering empty 1/2 tank and below? It was too short to get anywhere near the bottom of the tank. BTW, the factory one (on the right) originally had the bend next to the float at a 90 degree angle but I had corrected that shortly after getting the Hawk. The CSC one on the left shipped as you see it.
http://www.cscmotorcycles.com/TT250-...-p/zt8-113.htm |
|
09-02-2016, 01:39 PM | #68 |
Join Date: Apr 2016
Posts: 100
|
Where did you get your hand guards? I got some but one has already broke due to cheap plastic.
__________________
2015 Hawk 250 ~ Aftermarket Exhaust/K&N/LED everything/16/44T/Shinko 705's |
|
09-02-2016, 01:57 PM | #69 |
Join Date: May 2016
Posts: 583
|
#44 (on page 3) in this thread
|
|
09-02-2016, 01:59 PM | #70 |
Join Date: May 2016
Posts: 583
|
|
|
09-02-2016, 02:05 PM | #71 |
Join Date: May 2016
Posts: 583
|
Better mirrors (in case you missed my comment about them earlier in this thread):
https://www.amazon.com/gp/product/B016DRCZ6K Cruise control (an o-ring): https://www.amazon.com/dp/B00BQ1BL46 Handle Bar Ends Grips Heavy Weight: http://www.ebay.com/itm/172090290044 Engaged: Disengaged: |
|
09-08-2016, 04:15 PM | #72 | |
Join Date: Aug 2016
Posts: 27
|
where on the muffler did u drill the holes?
Quote:
|
|
|
12-13-2016, 10:33 PM | #74 | |
Join Date: Nov 2016
Location: robertsdale alabama usa
Posts: 1,007
|
Quote:
|
|
|
12-18-2016, 08:04 PM | #75 | |
Join Date: Apr 2016
Location: Chesapeake, VA
Posts: 207
|
Quote:
|
|
|
|
|
Thread Tools | Search this Thread |
Display Modes | |
|
|