Go Back   ChinaRiders Forums > Technical/Performance > Dual Sport/Enduro
Reply
 
Thread Tools Search this Thread Display Modes
Old 09-08-2024, 10:57 PM   #1
Mumen Rider   Mumen Rider is offline
 
Mumen Rider's Avatar
 
Join Date: May 2024
Location: Florida
Posts: 185
Templar X 250 parts diagrams

This ONLY applies to the Templar X 250 (X7-CB250F model).



These diagrams were provided to me directly by Zuumav, I would have just uploaded the original excel document but that's not a file type allowed here so I had to take the time to convert it to multiple jpg's.



Here is their(Zuumav) Aliexpress store front page(https://zuumav.aliexpress.com/store/1102211659/), I was told that customer support is available through them. I think this means you can order individual parts through that store.




















 
Reply With Quote
Old 09-09-2024, 08:49 AM   #2
Crossbar   Crossbar is offline
 
Join Date: Jun 2024
Posts: 99
Nice find, thanks for sharing..


 
Reply With Quote
Old 09-09-2024, 10:59 AM   #3
Thumper   Thumper is offline
 
Thumper's Avatar
 
Join Date: Feb 2021
Location: Kansas City
Posts: 2,843
This is great. Thanks

I wonder if the muffler (03.05.0407 exhaust rear silencer/K5) has the removable tip? Older Temp X had a welded tip, but my son's X from February 2024 had a set screw retainer so you can remove the tip and replace it with a USFS approved spark arrestor.
__________________
No matter where you go, there you are...

"It's the environment, stupid" ("No planet, no jobs" )


 
Reply With Quote
Old 10-07-2024, 05:25 PM   #4
vividpixel   vividpixel is offline
 
vividpixel's Avatar
 
Join Date: Feb 2022
Location: Nevada, USA
Posts: 117
First, thank you for passing these along, especially the extra effort of creating images. It looks like zip files are allowed on the forum, so you could right-click the spreadsheet and compress it to a zip archive. Would be much easier to find parts if we could do an actual search.

(I was struggling to find the rear brake caliper which was under the Handlebar Assembly section, rather than Rear Wheel & Tire.)
__________________
  • Really special rider. Probably out on the rocky dirt, breaking something, or in the garage, breaking something.
  • Templar X 250 (X7-CB250F): 13t/45t | X-ring | PE30 | K772 DT


 
Reply With Quote
Old 10-07-2024, 07:08 PM   #5
K'hermiit   K'hermiit is offline
 
K'hermiit's Avatar
 
Join Date: Nov 2023
Location: Central Arizona
Posts: 61
I vote this post gets stickied to the top. I was looking for it the other day and couldn't find it. Either that, or join this to the end of the Templar resource thread.


 
Reply With Quote
Old 10-24-2024, 11:56 AM   #6
vividpixel   vividpixel is offline
 
vividpixel's Avatar
 
Join Date: Feb 2022
Location: Nevada, USA
Posts: 117
Update/correction: Xpro confirmed this is an X7-CB250F when they generated me a parts quote. If Zuumav ever does send me a "correct" parts diagram, I'm eager to see what it would look like.

Quote:
Originally Posted by Mumen Rider View Post
This ONLY applies to the Templar X 250 (X7-CB250F model).
Zuumav on Aliexpress informed me this is the wrong model number. Our Templar X 250 is apparently an X7-PR250 despite what our owner manual says. The part # for the brake caliper that I gave them from this diagram, plus that CB250 model, led them down the wrong path and they were showing me the wrong brake pedal and brake caliper. After I gave them a couple more pics they showed me the correct parts and informed me of the model.
Quote:
This model factory is called X7-PR250, and the sub-pump is 002 pairs Not 06.08.0580
The part chart is not complete yet
I'll go to work tomorrow and ask the technical department if they can provide it
Unfortunately, they did recommend asking Xpro for parts, as their brake calipers are only sold in a set of 2 and also contains brake fluid already. :/

For now, these are the numbers they gave me:
Quote:
03.06.0513 This is the code of the complete set of rear brake pumps
06.08.0553。 This is a pump for rear brakes
I'll send you the brake pedal code tomorrow
Our current part diagram probably has some overlap, but it should be known that these are not all the correct part numbers. I'll update with that diagram when I receive it.
__________________
  • Really special rider. Probably out on the rocky dirt, breaking something, or in the garage, breaking something.
  • Templar X 250 (X7-CB250F): 13t/45t | X-ring | PE30 | K772 DT



Last edited by vividpixel; 10-25-2024 at 02:33 PM. Reason: Zuumav be crazy
 
Reply With Quote
Old 10-24-2024, 01:42 PM   #7
Mumen Rider   Mumen Rider is offline
 
Mumen Rider's Avatar
 
Join Date: May 2024
Location: Florida
Posts: 185
The only difference between the CB250F and the PR250 is the balance shaft and how it mounts at the front due to that. Parts are interchangeable between the two engines.


The brake calipers between the X7-PR250 and the X7-CB250F are exactly the same, the part number might be different but the actual parts are the same. The brake calipers are generic parts, you can find them all over aliexpress along with pads.


 
Reply With Quote
Old 10-24-2024, 03:33 PM   #8
vividpixel   vividpixel is offline
 
vividpixel's Avatar
 
Join Date: Feb 2022
Location: Nevada, USA
Posts: 117
Update/correction: Xpro confirmed this is an X7-CB250F when they generated me a parts quote. If Zuumav ever does send me a "correct" parts diagram, I'm eager to see what it would look like.

Hmm, well now I'm not sure what to believe. They definitely showed a different model of both caliper and brake pedal when I gave them the X7-CB250F model. When they saw my caliper and brake pedal they suddenly had images of the correct parts.

But what I'm happy to hear is that I may be able to just find this on AliExpress somewhere, guess I'll have to do some digging for that and the rear brake pedal.

Here are the parts they showed me for an X7-CB250F:


The circling is theirs, not sure why the foot peg is circled. [Seems there's some terminology confusion with all the "brake pump" references, so maybe they think I mean the foot peg next to the brake.]

The next set of images they sent (supposedly the X7-PR250) are actually the ones I have on my Templar X. But I guess we'll see what that next parts list looks like.
__________________
  • Really special rider. Probably out on the rocky dirt, breaking something, or in the garage, breaking something.
  • Templar X 250 (X7-CB250F): 13t/45t | X-ring | PE30 | K772 DT



Last edited by vividpixel; 10-25-2024 at 02:33 PM. Reason: Don't trust a manufacturer to know their own products
 
Reply With Quote
Old 10-24-2024, 03:54 PM   #9
Mumen Rider   Mumen Rider is offline
 
Mumen Rider's Avatar
 
Join Date: May 2024
Location: Florida
Posts: 185
The frame is a dead giveaway that it's not even a Templar model. The pictures they sent you are to a smaller 125 pit bike.


 
Reply With Quote
Reply

Tags
parts diagram, parts fiche, parts fish


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:36 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.