03-26-2022, 02:50 AM | #1 |
Join Date: Jul 2021
Posts: 62
|
Stainless header issue
I bought an aliex stainless header for my 169fmm chonda project. It s fine and light part. Only issue it s that it touches the clutch actuating lever on the case.. any suggestion to solve this?
|
|
03-26-2022, 09:06 AM | #2 |
Join Date: Oct 2020
Location: Flower Mound Texas
Posts: 904
|
The clutch lever can be bent down slightly.
__________________
2021 Tao Tbr7 - "Lucille" Mods so far- Brozz swingarm, 21" front rim (Bridgestone Tw302 rear/Dunlop D606 front tires), Digital gauge cluster, pz30b pumper carb, after market hand guards, aftermarket brake and clutch levers, round fold away mirrors, Fly handlebars shortened slightly, 13t front sprocket 2009 Q-link Legacy 250 1982 Suzuki GS1100ES - "Jolene" |
|
03-26-2022, 09:32 AM | #3 |
Join Date: Jan 2020
Posts: 277
|
This is exactly what I had to do on my Enforcer. You only need to bend it a couple of MM. I just used pliers. There's plenty of space below, just make sure you don't bend it so far that it rubs on the clutch cover.
|
|
|
|
Thread Tools | Search this Thread |
Display Modes | |
|
|