12-16-2021, 03:03 PM | #1 |
Join Date: Dec 2021
Posts: 1
|
Tao Tao Bull 150 Rear Brake spacers?
Friend wrecked back end of their Tao Tao Bull 150, I put a new axle housing on but I do not have the bolts or what I think should be spacers to mount the rear brake caliper on the axle housing. I was thinking about making my own but thought I would check if anyone knows where I could find some.
One website I know has some brake spacers, but the description calls out brake drums. Any help would be great. https://partskit.com/products/brake-...40981132476623 https://partskit.com/products/brake-...40981080932559 |
|
12-16-2021, 11:31 PM | #2 |
Join Date: Feb 2009
Location: Michigan
Posts: 1,040
|
There aren't any spacers for the rear brake. I checked out my Rhino tonight (same rear set up as the Bull). It's attached to the housing with two bolts. The bolts are flanged.
__________________
2012 Kawasaki Versys 1984 Honda Magna V65 2016 Rhino 250 2016 Tao Tao 125D |
|
12-17-2021, 04:35 AM | #3 |
Join Date: Sep 2014
Posts: 1,914
|
My Rhino uses a flat washer as a spacer on each flanged bolt. The caliper has a piston on both sides of the disk so the pads self center.
|
|
|
|
Thread Tools | Search this Thread |
Display Modes | |
|
|