|
|
|
|
Thread Tools | Search this Thread | Display Modes |
12-04-2021, 10:47 AM | #1 |
Join Date: Jul 2021
Location: Southern Illinois.
Posts: 33
|
TT250: Extreme problem replacing foot pegs - spring issue
Just got the TT250 and the pointy-sharp billet aluminum (I think) fancy foot pegs. Pulled off the one stock one and for the life of me cannot get the new one on.
It centers around the spring and despite doing other bikes this one is kicking my butt. I just cannot get the spring back in there; despite having a picture of how it supposed to look. Every video I pull up on youtube seems to have different spring shape/size. I'll attach a picture of what it is SUPPOSED to look like but I just can't figure out how to get it in without parts flying away from me lol. |
|
12-04-2021, 11:48 AM | #2 |
Join Date: May 2018
Posts: 1,639
|
wire both ends of the spring together after squeezing them in a vise ,carefully install everything on the bike ,then cut the wire after everything is in place .Wear some safety glasses or get your worst neighbour to do it ,it will hurt if you mess it up .
|
|
|
|
Thread Tools | Search this Thread |
Display Modes | |
|
|