RX4 Trail Worthy?

pyoungbl · 04-07-2021, 11:18 AM

I have tried, twice, to get compatible levers from China. Although they were listed as fitting the RX3 and RX4 the clutch side really did not fit. It was more than just the clutch switch, I can shim that as mentioned. The perch itself did not marry up with the bracket on the handlebar. It was close but just not cut with the correct angles to work correctly. For $25 it was worth trying. Now I have two sets...anyone want to see if they fit your bike better than mine?

Peter Y.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

04-07-2021, 11:18 AM	#17
pyoungbl Join Date: Feb 2016 Location: Portsmouth, Virginia, USA Posts: 632	I have tried, twice, to get compatible levers from China. Although they were listed as fitting the RX3 and RX4 the clutch side really did not fit. It was more than just the clutch switch, I can shim that as mentioned. The perch itself did not marry up with the bracket on the handlebar. It was close but just not cut with the correct angles to work correctly. For $25 it was worth trying. Now I have two sets...anyone want to see if they fit your bike better than mine? Peter Y.
	0