csc tt250 catalytic converter help

TheChairman · 06-01-2020, 12:24 AM

The pilot jet that comes with the jet kit is too big if you remove the evap canister from the system. Its sized to include the large vacuum leak the canister causes.

If you remove the canister, stick with the factory pilot jet and install the new adjustment screw and parts.

I am going up to a 115 on the main jet. The 110 seems a bit small for this exhaust mod.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

06-01-2020, 12:24 AM	#10
TheChairman Join Date: May 2020 Location: Philadelphia Posts: 115	The pilot jet that comes with the jet kit is too big if you remove the evap canister from the system. Its sized to include the large vacuum leak the canister causes. If you remove the canister, stick with the factory pilot jet and install the new adjustment screw and parts. I am going up to a 115 on the main jet. The 110 seems a bit small for this exhaust mod.
	0