04-26-2020, 12:18 AM | #1 |
Join Date: Dec 2018
Location: PNW
Posts: 983
|
Carburetor mounting nut lost
Last weekend I was out about 8 miles riding my HAWK when it started developing hesitation while I was holding a steady half throttle. Not good so I high tailed for home and made it. Seemed to be acting like an ignition issue. So yesterday I went to take the plug out to look at it and I noticed the plug wire mounting grommet was loose and then I saw the right side carburetor nut was missing! One of the few things I had not used the lock tite on. The left side was none to tight either. I think I will put on some double nuts with the loc tie.
|
|
04-26-2020, 01:04 AM | #2 |
Join Date: Apr 2017
Location: Omaha, NE
Posts: 8,100
|
Yeah, I had that happen once. I just tossed some lock washers on behind the nuts and it never happened again.
__________________
Hawk Information and Resource guide: http://www.chinariders.net/showthread.php?t=20331 2018 Hawk 250 - Full Mod list here. http://www.chinariders.net/showpost....62&postcount=1 2024 Royal Enfield Shotgun 650 https://chinariders.net/showthread.php?t=34124 |
|
|
|
Thread Tools | Search this Thread |
Display Modes | |
|
|