03-10-2020, 04:37 AM | #1 |
Join Date: Aug 2012
Posts: 6
|
hellcat plastics
Sorry if this has been talked about before. How do you remove plastics on a tao tao hellcat? Looks like you have to remove muffler to get to a couple screws.
|
|
03-10-2020, 08:25 AM | #2 |
Join Date: Mar 2019
Posts: 45
|
Access to screws under seat.
Add plastic washers when reassembling to prevent plastics from cracking. I have a thread discussing it. |
|
03-10-2020, 04:21 PM | #3 |
Join Date: Aug 2012
Posts: 6
|
Yeah I need to take front plastics off to change out fuel hoses and vacuum lines, do I have to remove rear plastic to do that?
|
|
03-10-2020, 07:18 PM | #4 |
Join Date: Mar 2019
Posts: 45
|
Yes. The front are attached by 2 screws to the tank black plastic and 1 on rear. Same front area there 2 tabs you can carefully bend free. Pivot out from top and pull up slightly to disengage lower L catch.
|
|
03-10-2020, 07:21 PM | #5 |
Join Date: Aug 2012
Posts: 6
|
Thank you!
|
|
|
|
Thread Tools | Search this Thread |
Display Modes | |
|
|