|
11-06-2016, 08:34 AM | #1 |
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
|
Cheaper is always best. However, I suspect the TT250 front wheel is the standard, Chinese front wheel. If so, I am pretty confident it will not fit. The hub of any wheel from another mootorcycle must accomodate the RX3 speedometer sensor, brake rotor, et cetera, and this is very unlikely.
Formerly I would allow people to ship me their hubs, and I would build them custom wheels for $55, plus the actual cost of all other parts (rims, spokes, et cetera), plus shipping. However, if I decide to do this project, I would only build and ship complete wheels. I estimate I could build a complete, 21-inch front wheel for about $325, plus actual shipping costs to the buyer. This wheel would include the following items. New, complete Zongshen hub, including all bearings and seals New, alloy, Warp9 rim (black, blue, orange, red, or silver) New, custom, 21-inch, stainless steel spokes New, stainless steel, spoke nipples Actual shipping and packaging costs usually average around $45. If anyone is interested, let me know, and I will research the matter further.
__________________
Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894 Last edited by SpudRider; 11-06-2016 at 10:07 AM. |
|
|
|
Thread Tools | Search this Thread |
Display Modes | |
|
|