10-05-2016, 09:02 AM | #1 |
Join Date: Oct 2016
Location: Cedar Rapids, IA
Posts: 11
|
2 Arctic Whites heading to Cedar Rapids
Just got the call from the trucking company, delivery set for 10-12 tomorrow. Can't wait to get unpacked and fired up.
The second one is for a friend of mine, we kind of coersed each other into the purchase I'll let you know how everything goes....had to re-arrange the bikes in the garage last night to make sure there is room |
|
10-05-2016, 07:41 PM | #2 |
Join Date: Sep 2016
Location: Eastern Iowa, USA
Posts: 8
|
Congratulations and welcome to the forums...lol. Make sure you top off the blinker fluid and adjust the muffler belt before the first ride.
See you tomorrow to uncrate the new bikes...
__________________
2017 Z125Pro, 2016 CSC RX3, 2009 Concours, 2009 Ninja250, 2008 GS500F, 2007 HD FXDWG 2005 HD FLTRI, 2003 M1000S2R, 2002 Zuma 1999 VMax, 1990 CB1, 1989 VTR250 1972 G90SS |
|
10-05-2016, 09:43 PM | #3 | |
Join Date: May 2006
Location: Yuma, Arizona
Posts: 9,056
|
Quote:
You almost forgot to mention to charge the farkle motor!
__________________
"They say that life's a carousel, spinning fast you got to ride it well..." TGB Delivery Scooter 150 TMEC 200 Enduro--carcass is sadly rotting in the backyard |
|
|
10-05-2016, 11:49 PM | #4 |
Join Date: Sep 2014
Location: Arvada, CO
Posts: 1,004
|
Congrats! You're in for a good time!
__________________
Red 5 standing by! 2015 CSC red RX3 with 19" front wheel, Shinko 804/805, skid plate, tall seat, 13T/45T sprockets, progressive shock, Winyoochanok windshield, GENSSI LED headlight, SW-Motech tankbag, Shorai Lithium battery 2014 Ural Patrol |
|
10-06-2016, 01:02 AM | #5 |
Join Date: Feb 2016
Location: George West, Texas
Posts: 4,097
|
Don't even think about coming back without pics!
__________________
***************************************** 2015 Bashan"Blaze" BS250GY-31 (DB-07K-250) GONE 2017 Suzuki V Strom 650 XT "We are all born ignorant, but one must work hard to remain stupid." ~Benjamin Franklin~
|
|
10-06-2016, 09:59 PM | #7 |
Join Date: Jul 2015
Location: Milpitas, CA. USA
Posts: 775
|
Great unveiling.
How many miles did you two put on them today?
|
|
10-06-2016, 10:25 PM | #8 |
Join Date: Oct 2015
Location: FL, GA, NC
Posts: 771
|
I noticed that there aren't any metal reinforcement strips on the pallets.
But there doesn't seem to be any pallet damage. jb
__________________
2016 Honda CB500F......2017 Triumph Street Twin 2014 XT 250........ |
|
10-06-2016, 11:24 PM | #10 |
Join Date: May 2006
Location: Yuma, Arizona
Posts: 9,056
|
__________________
"They say that life's a carousel, spinning fast you got to ride it well..." TGB Delivery Scooter 150 TMEC 200 Enduro--carcass is sadly rotting in the backyard |
|
10-07-2016, 08:16 AM | #11 |
Join Date: Sep 2016
Location: Eastern Iowa, USA
Posts: 8
|
No metal in the crates, and no damage to the bikes or crates either. Driver actually wanted to stick around and see the bikes uncrated as he has five motorcycles himself and was very curious about these. before he left he made sure he had CSC Information so he could potentially buy one for himself...lol
Ive only got 35 miles or so on mine so far. Its gonna take awhile to get mine fully broken in as I have a few other bikes(see sig) to ride too. First impression was that these are very nice machines, and the fit and finish far exceeded my expectations. Engine sounded tight when it was first started, however I can already feel it loosening up a bit and running well.
__________________
2017 Z125Pro, 2016 CSC RX3, 2009 Concours, 2009 Ninja250, 2008 GS500F, 2007 HD FXDWG 2005 HD FLTRI, 2003 M1000S2R, 2002 Zuma 1999 VMax, 1990 CB1, 1989 VTR250 1972 G90SS |
|
10-07-2016, 08:28 PM | #12 |
Join Date: Oct 2016
Location: Cedar Rapids, IA
Posts: 11
|
85 so far....have to work at it to find roads where 50 MPH top speed is OK. Luckily some gravel + backroads not far from here. Thinking oil change as soon as I break 200 miles and consider it broken in, on goes the 13 tooth, no RPM limits....then on to the 500 mile service.
Was luke warm on it yesterday because I didn't know what to expect. Like it way more today....it's just me getting used to this bikes role....quite a riding shift coming off the big bikes. I'll be honest....really starting to enjoy it. It's a very smooth riding bike, good transmission (minus the neutral thing), handles well Really looking forward to riding this baby.
__________________
2008 Honda VFR 2009 Kaw Concours 1998 Vmax couple of 73 Yamaha RT 360's |
|
10-08-2016, 12:11 PM | #13 |
Join Date: Jun 2016
Location: Tacoma
Posts: 16
|
Reminds me of the day I got mine. It was a few days after Thanksgiving. I remember thinking I couldn't wait till it was over so I could get my bike. Since then I've loved every mile. Don't get caught up in all the negativity going around lately. Use the bike for it's intended purpose, and that's putting huge smiles on your faces. Great choice of bike and can't wait to see pictures of your adventures.
|
|
10-08-2016, 07:28 PM | #14 |
Join Date: Oct 2016
Location: Cedar Rapids, IA
Posts: 11
|
No worries about nagativity....I don't need anyone's approval for what I ride. If I did, I spose I'd ride a hardly or BMW
Enjoying it so far, wish the break-in RPM at least allowed 55 MPH....LOL
__________________
2008 Honda VFR 2009 Kaw Concours 1998 Vmax couple of 73 Yamaha RT 360's |
|
10-08-2016, 07:33 PM | #15 |
Join Date: Oct 2016
Location: Cedar Rapids, IA
Posts: 11
|
Just over 150.....damn, I'm ready for the oil change
__________________
2008 Honda VFR 2009 Kaw Concours 1998 Vmax couple of 73 Yamaha RT 360's |
|
|
|
Thread Tools | Search this Thread |
Display Modes | |
|
|