lower ball joints

mark123 · 07-15-2015, 09:15 PM

My lower ball joint seperated on a 110cc chinook ATV. can they be cut out ad a new one welded in? Otherwise I assume you have to replace the entire A-arm. Where can these be bought cheap

Adjuster · 07-15-2015, 09:27 PM

Not pressed in and out like cars/trucks?

/

mark123 · 07-15-2015, 09:33 PM

the ball joint and the 2 little solid arms are all one piece and then welded into the tubing of the a-arms

Weldangrind · 07-16-2015, 12:43 AM

I've seen them like that, and I shuddered at the thought of replacement.

I'd search on eBay first, to see if a complete arm is available at a decent price; definitely the easiest route. If not, I'd buy a similar ball joint that has the same dimensions and weld in a plate to accept it. If that's the route you go, make sure to buy a bolt-in joint.

07-16-2015, 12:43 AM	#4
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	I've seen them like that, and I shuddered at the thought of replacement. I'd search on eBay first, to see if a complete arm is available at a decent price; definitely the easiest route. If not, I'd buy a similar ball joint that has the same dimensions and weld in a plate to accept it. If that's the route you go, make sure to buy a bolt-in joint. __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-15-2015, 09:27 PM	#2
Adjuster Join Date: Dec 2014 Location: Deerfield Beach FL Posts: 1,410	Not pressed in and out like cars/trucks? /
	0

07-15-2015, 09:33 PM	#3
mark123 Join Date: Nov 2009 Posts: 10	the ball joint and the 2 little solid arms are all one piece and then welded into the tubing of the a-arms
	0