Replacing Regular flasher With Electronic One on the Sierra

dwholler · 09-09-2009, 09:12 PM

I recently changed out the rear turn signals with LED ones, as we lost a lens. So to accomplish that, you have to replace the stock flasher with an electronic one. I used the LFS-1-FLAT electronic flasher recommended by spud located here:
http://www.superbrightleds.com/flashers.htm

By testing with a meter i determined the wiring which is shown in the following picture:

Here is the rear of the bike with the LED turn signals I bought off ebay. They are brighter than the stock ones and flash at the correct speed.

Dave

09-09-2009, 09:12 PM	#1
dwholler Join Date: Jun 2009 Posts: 56	Replacing Regular flasher With Electronic One on the Sierra I recently changed out the rear turn signals with LED ones, as we lost a lens. So to accomplish that, you have to replace the stock flasher with an electronic one. I used the LFS-1-FLAT electronic flasher recommended by spud located here: http://www.superbrightleds.com/flashers.htm By testing with a meter i determined the wiring which is shown in the following picture: Here is the rear of the bike with the LED turn signals I bought off ebay. They are brighter than the stock ones and flash at the correct speed. Dave
	0