UNI Air Filter Upgrade

NEOPLAZMA · 04-03-2009, 02:19 PM

just finished installing a new UNI Air Filter, Part #UP4152AST POD clamp-on Dual Layer with a 15 degree angle.

it fit like a glove using the original elbow from my old stock air filter.

if you still have your old stock filter, just twist n pull off your old air filter cylinder from the elbow, "strip" off the ridges and grooves until the end is as smooth as you can get it, slip the UNI over the end , losely tighten it and then install the elbow to your carb. adjust the filter so its not rubbing against your brake fluid hose, ziptie if need be like i did, tighten it all up and your done...

04-03-2009, 02:19 PM	#1
NEOPLAZMA Join Date: Mar 2009 Location: okanagan valley B.C Posts: 32	UNI Air Filter Upgrade just finished installing a new UNI Air Filter, Part #UP4152AST POD clamp-on Dual Layer with a 15 degree angle. it fit like a glove using the original elbow from my old stock air filter. if you still have your old stock filter, just twist n pull off your old air filter cylinder from the elbow, "strip" off the ridges and grooves until the end is as smooth as you can get it, slip the UNI over the end , losely tighten it and then install the elbow to your carb. adjust the filter so its not rubbing against your brake fluid hose, ziptie if need be like i did, tighten it all up and your done... __________________ THE QUAD GIVES YOU THE ILLUSION OF CONTROL, BUT ACTUALLY, IT WANTS TO KILL YOU.
	0