![]() |
#1 |
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,651
|
Hangkai 18HP 2 Stroke Outboard
Well I decided to get back into fishing again so i bought a nice used 15' aluminum boat and in the true Chinariders spirit, I ordered a Hangkai 18HP 2 stroke outboard off of Amazon that was fairly cheap compared to the name brand stuff. https://amzn.to/3xxVFOq I also installed an Tach/Hour meter. https://amzn.to/3REYNii
My first impression when I opened the box was it looked like a nice, well built motor. It included everything needed like the tank, gas hose, extra spark plugs, Impeller and gaskets. I took it out of the box and set it on my motor stand that i built. As per instructions, i added gear oil to the foot. I did a 25:1 mixture for the break-in as per instructions. Need to run this mixer for the first 10 hours then switch to a 50:1 mixture after. I hooked up the water to the foot, then pumped the bulb up on the gas line till hard. Pulled the choke and gave it a pull on the rope. I was shocked that it started on the first pull. Can't wait to get my trailer in so I can go take it for a ride.
__________________
2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel |
![]() |
|
![]() |
|
|