Templar 250 resource guide

Mumen Rider · 05-30-2024, 10:38 PM

I ran out of cut off wheels for my dremel tool but I have these pliers that managed to get the OEM carb screws out without much fuss even with the red thread lock on the bolts. Engineer PZ-57 Japanese pliers($16 on Amazon, a great alternative if you don't have a dremel tool or don't want to spend the money for this one job). You will need M4-.70x20mm screws to replace the OEM headless bolts.

I could only fit one .5mm shim under the needle and still have the white plastic needle retainer clip into the slide piston.

05-30-2024, 10:38 PM	#11
Mumen Rider Join Date: May 2024 Location: Florida Posts: 131	I ran out of cut off wheels for my dremel tool but I have these pliers that managed to get the OEM carb screws out without much fuss even with the red thread lock on the bolts. Engineer PZ-57 Japanese pliers($16 on Amazon, a great alternative if you don't have a dremel tool or don't want to spend the money for this one job). You will need M4-.70x20mm screws to replace the OEM headless bolts. I could only fit one .5mm shim under the needle and still have the white plastic needle retainer clip into the slide piston.
	0