|
![]() |
|
|
Thread Tools | Search this Thread | Display Modes |
![]() |
#16 |
Join Date: Feb 2021
Location: Kansas City
Posts: 2,558
|
Yes. Removing the carb is not that much work, but getting it back in can be a wrestling match. Warming up the rubber with a blow dryer on low is a good idea.
If you take it off, you might want to have jets to swap out, and shim the needle a mm or so. https://www.chinariders.net/showpost...3&postcount=25 Needle shim is described in post #5 https://www.chinariders.net/showpost...79&postcount=5
__________________
-2022 5 speed Templar X Orange, OEM 51T rear sprocket, 14T front sprocket -NOS 2020 KTM 250SX (2-stroke motocross), less than 10 hours on it |
![]() |
|
![]() |
Tags |
carb issues, problems, templarx |
|
|