2022 Templar 250 only starts with hot start and will die unless I hit the throttle.

Thumper · 11-23-2023, 01:18 PM

Yes. Removing the carb is not that much work, but getting it back in can be a wrestling match. Warming up the rubber with a blow dryer on low is a good idea.

If you take it off, you might want to have jets to swap out, and shim the needle a mm or so.
https://www.chinariders.net/showpost...3&postcount=25

Needle shim is described in post #5
https://www.chinariders.net/showpost...79&postcount=5

11-23-2023, 01:18 PM	#16
Thumper Join Date: Feb 2021 Location: Kansas City Posts: 2,771	Yes. Removing the carb is not that much work, but getting it back in can be a wrestling match. Warming up the rubber with a blow dryer on low is a good idea. If you take it off, you might want to have jets to swap out, and shim the needle a mm or so. https://www.chinariders.net/showpost...3&postcount=25 Needle shim is described in post #5 https://www.chinariders.net/showpost...79&postcount=5 __________________ No matter where you go, there you are
	0