![]() |
#16 |
Join Date: Feb 2022
Location: Nevada, USA
Posts: 98
|
I'm happy to have helped, and I was able to secure the light correctly if that gives you hope! Super glue for the metal ring that came with the light because the light kept popping off the ring, then I was able to bend one of the motorcycle headlight clips I bought in a way that would hold the ring in place with light attached (my original clip was previously bent to hell when fitting one of those LED bulbs with the bulky fan in back).
Here is the low and high beam, with correct bulb orientation: ![]() ![]() The plastic rings I bought were too small in diameter, so I used nothing but what came with the bulb and then the retaining metal clip which you can likely use the one that originally came on the headlight. I'd say a clean light output. I have the beam adjusted I believe to almost its lowest but may need to aim it up now; I'll see when i go out into the desert after dark.
__________________
Templar X 250: 14t / 42t, Nibbi PE30 |
![]() |
|
![]() |
Tags |
dualsport, quality, templar, xpro, zongshen |
|
|