09-05-2023, 04:28 PM | #37 |
Join Date: Aug 2023
Posts: 2
|
I have a 250 RPS magician 167 fmm stamped on the block. Carbureted, I purchased it knowing it needed work stator was missing that's what I'm on right now I purchased one but the colors of the wires are different than the factory harness.
Stator to harness Blue/white Yellow Pink Red/blk Green/white This has a 6 wire cdi. Harness to stator (4pin) 2 solid yellows Blue/white Solid green. Obviously the blue and white go together I would assume but I'm getting no spark. I got two double check all my saf ety sensors. And this is not the gear indicator (6) pin. But it does have a strong rollover any help would be greatly appreciated thank you guys |
|
|
|
|
|