What is better than a CT110/ Postie Bike?

XLsior · 08-07-2023, 02:50 AM

The Hi/Lo transfer box re assembled.

Nice confirming actuation.

Also the 81 Cylinder head has been soaking in the vinegar bucket for about a week so it was about time to see if it would free up.

I used an M7 fine thread tap in a drill to bite into the dowel and shock spin the dowel out of the rocker arms...

Which worked...

With those out of the way i could remove the valve springs and see if the valves could move, or if they were stuck in the guides...

penetrating fluid and lots of little taps with a little hammer and both valves did come out.

Suffice to say after a clean up other than some pitting on the valve springs and a well used intake valve all parts seem usable.

08-07-2023, 02:50 AM	#14
XLsior Join Date: Aug 2020 Location: Australia Posts: 1,390	Transfer box Assembled The Hi/Lo transfer box re assembled. Nice confirming actuation. Also the 81 Cylinder head has been soaking in the vinegar bucket for about a week so it was about time to see if it would free up. I used an M7 fine thread tap in a drill to bite into the dowel and shock spin the dowel out of the rocker arms... Which worked... With those out of the way i could remove the valve springs and see if the valves could move, or if they were stuck in the guides... penetrating fluid and lots of little taps with a little hammer and both valves did come out. Suffice to say after a clean up other than some pitting on the valve springs and a well used intake valve all parts seem usable. Attached Thumbnails
	2