Stripped Oil Drain plugged

WD-40 · 07-11-2023, 01:53 PM

I got screwed by the guy I bought my bike from. He stripped the oil drain threads and left the drain open. Bike is a 22 BD-125 grom clone.

Is the original drain bolt a m12x1.5? Not sure about the length.

Do you guys recommend a self-tapping oversized drain bolt?

And what are your thoughts on this

https://www.amazon.com/Heli-Coil-554...s%2C193&sr=8-7

I've used a "Sav a thread" kit before but that didn't have a helicoil tag you had to break off. I'm worried about that falling into the engine. Unless I can leave it on?

All help is greatly appreciated, thanks.

07-11-2023, 01:53 PM	#1
WD-40 Join Date: Jul 2023 Posts: 6	Stripped Oil Drain plugged I got screwed by the guy I bought my bike from. He stripped the oil drain threads and left the drain open. Bike is a 22 BD-125 grom clone. Is the original drain bolt a m12x1.5? Not sure about the length. Do you guys recommend a self-tapping oversized drain bolt? And what are your thoughts on this https://www.amazon.com/Heli-Coil-554...s%2C193&sr=8-7 I've used a "Sav a thread" kit before but that didn't have a helicoil tag you had to break off. I'm worried about that falling into the engine. Unless I can leave it on? All help is greatly appreciated, thanks.
	0