Templar M Questions

TemplarM250 · 03-25-2023, 08:57 PM

Has anyone had issues with frame rust developing inside the frame?

pichost

Chain had spots where it would get tighter and looser. Figured the chain was stretched, which it was. Replaced the chain but still found that the sprockets must have high and low spots in them.

Ordered a new rear sprocket JTR210.45 from Amazon but it does not fit the rear wheel. What would be the correct sprocket that fits on the Templar M?

Does anyone have pictures that show to to correctly route the cables for the front controls through the forks? My setup is a mess currently.

All input is appreciated, thanks.

03-25-2023, 08:57 PM	#1
TemplarM250 Join Date: Sep 2022 Location: Minnesota Posts: 21	Templar M Questions Has anyone had issues with frame rust developing inside the frame? pichost Chain had spots where it would get tighter and looser. Figured the chain was stretched, which it was. Replaced the chain but still found that the sprockets must have high and low spots in them. Ordered a new rear sprocket JTR210.45 from Amazon but it does not fit the rear wheel. What would be the correct sprocket that fits on the Templar M? Does anyone have pictures that show to to correctly route the cables for the front controls through the forks? My setup is a mess currently. All input is appreciated, thanks. __________________ 2022 Templar M 250 28 mm KIMISS carburetor 125 main 42 pilot Needle clip at center DID x-ring chain JTR897 45 tooth rear sprocket
	0