2022 kpr200

[herbie]

Originally Posted by JimS

I'll keep an eye on the order. Current status shows "Ordered". I'm in no hurry for it.

Also ordered a bag like the one you have installed herbie. I have a smaller bag that is sufficient for the time being but the larger bag will be more practical.

I'm really enjoying riding again - especially in the morning when the temps are below 80. I may change to a 16 tooth front sprocket in the near future.

That's really awesome that you are riding again! I couldn't even imagine not riding, it's therapy for me

That bag is expandable and can fit a helmet inside, I really like it. The 16 tooth sprocket is really only good for one thing in my opinion and that is lowering the rpm's a little bit for highway riding. It doesn't really benefit it very much as far as speed goes because 17hp pushing against 80mph wind is pretty maxxed out! The engine will have a little bit lower rpm's in every gear but it's not that noticeable. I've gone back and forth with the 15 and 16 tooth as well as trying the 17 tooth sprocket. My conclusion is the 15 tooth is geared perfectly for most applications, if highway riding plays a big part then absolutely, I would recommend the 16 tooth sprocket.